Plastic Pipe Fittings

Push-fit rigid polymer elbow for pneumatic air lines with male thread.

PVC straight coupler for joining two twenty-five-millimetre plastic pipes.

Push-fit acetal stem elbow for quarter-inch water pipe branching.

Push-fit CPVC straight coupler for twenty-two-millimetre plastic water pipes.

PVC cap for sealing and closing thirty-two-millimetre plastic water pipes.

PVC socket coupler for joining two twenty-millimetre diameter plastic pipes.

PVC socket coupler for joining two forty-millimetre diameter plastic pipes.

ABS threaded adapter for connecting half-inch pipes in water systems.

PVC tank adapter for 25mm pipes, cemented connection for water storage.

Push-fit coupler for joining 15mm water pipes without tools or glue.

90-degree PVC elbow for 1.25-inch pipes, changes pipe direction.

PVC adapter socket for 20mm pipes with half-inch threaded connection.

ABS full-face flange for 1.5-inch pipes, enables bolt connections.

45-degree CPVC elbow for 32mm pipes, angles pipe connections.

45-degree CPVC elbow for 20mm pipes, angles smaller pipe connections.

ABS tee fitting for 3/4-inch pipes, splits water flow in three directions.

Push-fit tee for 15mm pipes, splits water flow without glue.

Polymer banjo fitting for 6mm tubes, connects to quarter-inch ports.

Grey PVC angled elbow for 16.9mm conduit tubes, routes cables.

Threaded PVC tee for 25mm pipes, splits flow with three-quarter-inch port.