Firmware upgrade for Honeywell X-series and GR chart recorders.

Firmware upgrade package for Honeywell X-series and GR chart recorders.

Software upgrade for Honeywell X-series and GR chart recorders for data acquisition.

Large industrial-grade aluminum heatsink for high-power thermal dissipation.

Precision hydrometer for measuring liquid density between 0.8 and 1.0 specific gravity.

Ultrasonic thickness tester for materials and coatings measuring 0.75mm to 80mm range.

Ultrasonic thickness meter measuring up to 100mm with 0.01mm precision resolution.

Six-port USB combo hub with mixed USB 3.0 and charging capabilities.

Compact motor protection breaker from ABB for ultra-low current motor protection.

Thin enamelled copper wire for small electrical components and precision winding applications.

Ultra-precision force and torque gauge with RS232/USB output for demanding laboratory testing.

Programmable electronic load for testing power supplies and batteries up to 200W, 500V, 15A.

Digital thickness meter measuring material thickness from 0.75mm to 80mm.

Programmable electronic load for testing power supplies and batteries up to 400 watts.

HDMI wall-mounted connector plate for routing video and audio in permanent installations.

Eaton direct-on-line motor starter for small three-phase motors up to 0.18 kilowatt.

Eaton three-phase motor starter for small industrial motors up to 0.18 kW.

Current measurement module for precise electrical current monitoring in control systems.

High-temperature infrared sensor for measuring 0 to +250°C with analog output.

Three-phase motor protection breaker for small industrial motors up to 690 volts.

Electric lawn mower and edge trimmer set with 1200W power for small gardens.

Imperial dial indicator for checking runout and variations up to half inch.

Short USB 3.0 cable connecting computers and devices quickly.

Short high-speed USB 3.0 cable for connecting to micro USB mobile devices.

Short USB 2.0 cable connecting USB B male to female connectors for devices.

Short yellow fiber optic patch cable for high-speed network connections.

Tiny 0.7mm metric hex key in chrome vanadium for delicate work.

Ultrasonic thickness meter for measuring metals and materials from thin to 80mm thick.

Eaton direct-on-line motor starter for small three-phase motors up to 180 watts.

SMC pneumatic regulator controls compressed air pressure from 0.1 to 0.7 MPa for industrial systems.

Hand ratcheting crimp tool for fine wire terminals and splices.

Fine-tip technical pen with 0.35mm point for precise drawing.

Metric dial indicator measuring to 10mm with 0.01mm resolution for precision work.

High-speed external drive for video and media file backup.

Mitutoyo metric DTI gauge measuring 0.8mm for precision engineering applications.

Snap-on cable marker labeled '0' for tiny wires 0.8 to 2.2mm.

Imperial dial indicator measuring 0.5 inch with UKAS calibration for precision work.

Ultra-thin thermal interface material for high-performance heat transfer in compact assemblies.

Assorted snap-on markers numbered 0-9 for tiny wires 0.8-2.2mm labeling.

Precision ultrasonic thickness meter measuring materials from 3mm to 300mm with high accuracy.