Clausing 13-3/4" x 25-1/4" Engine Lathe: Frequency, 10 hp, 230 V-3 Phase, 1-5/8" Spindle Bore Dia, 17 to 3,250 RPM

Phase Three Spindle Speed Control Frequency Bed Width (Inch) 12.5197 Bed Width 12.5197 in; 318.0 mm Distance Between Centers (Inch) 25-1/4 Cross Slide Travel 9.875 in; 250.83 mm Gap Length (Decimal Inch) 6.5000 Gap Length 165.1 mm; 6.5 in Cross Slide Travel (Inch) 9-7/8 Cross Slide Travel (Decimal Inch) 9.8750 Swing (Inch) 13-3/4 Spindle Bore Diameter (Inch) 1-5/8 Minimum Spindle Speed 17 Spindle Nose Designation D1-4 Maximum Spindle Speed 3250 Overall Height 65 in; 65.0000 in Overall Depth 53 in; 53.0 in Minimum Metric Pitch (Decimal Inch) 0.0079 Number of Inch Threads 56 Minimum Metric Pitch 0.0079 in Spindle Taper Size 4MT Tailstock Taper Size 4MT Tailstock Travel (Decimal Inch) 5.6875 Tailstock Travel 5.6875 in; 144.46 mm UNSPSC Code 23242300 Maximum Threads Per Inch 56 Min. Longitudinal Feed Per Rev. (Decimal Inch) 0.0181 Overall Depth (Inch) 53 Overall Length (Inch) 80 Max. Longitudinal Feed Per Rev. (Decimal Inch) 1.1811 Maximum Longitudinal Feed Per Revolution 30.0 mm; 1.1811 in Minimum Cross Feed Rate Per Revolution 0.0007 in Min. Cross Feed Rate Per Revolution (Decimal Inch) 0.000700 Max. Cross Feed Rate Per Revolution (Decimal Inch) 0.0480 Maximum Cross Feed Rate Per Revolution 0.048 in; 1.22 mm Swing Over Cross Slide (Decimal Inch) 7.7500 Swing Over Cross Slide (Inch) 7-3/4 Swing Over Gap (Inch) 21 Swing Over Gap (Decimal Inch) 21.0000 Swing Over Gap 21 in; 533.4 mm; 21.0 in Series Harrison