Technical Specification Confirmation
PROCUREMENT & SUPPLY DECISION RECORD
Ref: ACG-SPEC-MQEITVYJ  ·  Generated: 15 Jun 2026
ACG AgaCanGroup
sales@agacaninvestment.com
agacangroup.com
RS PRO Nitrile O-Ring, 10.8mm Bore, 14.8mm Outer Diameter
RS PRO
RS PRO Nitrile O-Ring, 10.8mm Bore, 14.8mm Outer Diameter
Part No.
255-6782
Procurement Intelligence
RS PRO standard nitrile O-Ring series for general-purpose fluid sealing applications. This metric-sized seal (10.8mm ID × 14.8mm OD × 2mm) is installed in grooved cavities for static or low-speed dynamic sealing in hydraulic, pneumatic, and industrial systems. Critical verification: confirm groove dimensions (ISO 3384 standard) match this cross-section to prevent extrusion or leakage.
Hydraulic and pneumatic sealing
Before ordering — verify:
☐ Temperature range -30 to +90°C
☐ Nitrile material compatibility
☐ Groove cavity fit verification
Technical Specifications
Inside Diameter10.8mm
Outside Diameter14.8mm
Thickness2mm
MaterialNitrile
TypeO-Ring
Minimum Operating Temperature-30°C
Maximum Operating Temperature+90°C
ACG Industrial & Infrastructure Solutions
Kampala, Uganda  ·  Malatya, Turkey
http://agacangroup.com/product/mechanical/bearings-seals/gaskets-seals-packings/gaskets-o-rings/rs-pro-nitrile-o-ring-10-8mm-bore-14-8mm-outer-diameter?mal=6628ac4e12f5f0d90dcd7ca7
This document confirms the above specification is available in the ACG Industrial catalogue. Pricing and availability on request. Forward to your procurement team to initiate an RFQ.