Technical Specification Confirmation
PROCUREMENT & SUPPLY DECISION RECORD
Ref: ACG-SPEC-MQEL3X75  ·  Generated: 15 Jun 2026
ACG AgaCanGroup
sales@agacaninvestment.com
agacangroup.com
TE Connectivity Heat Shrink Boot Black, Elastomer Adhesive Lined, 36mm
TE Connectivity
TE Connectivity Heat Shrink Boot Black, Elastomer Adhesive Lined, 36mm
Part No.
222S152-25C-0
Procurement Intelligence
The 222S152 series is a dual-diameter heat shrink boot with adhesive lining for sealing and protecting cable joints and connectors. Installation involves sliding the boot over the cable, positioning it over the joint, then applying heat to achieve dual-stage shrinkage. Critical verification: confirm primary diameter (36mm) and secondary diameter (22mm) match your cable and connector geometry before procurement.
Cable joint environmental sealing
Before ordering — verify:
☐ Adhesive lining integrity
☐ Temperature range compliance
☐ Shrinkage ratio validation
Technical Specifications
TypeHeat Shrink Boot
Inside Diameter Primary36mm
Inside Diameter Secondary22mm
Adhesive LinedYes
MaterialElastomer
ColourBlack
Minimum Operating Temperature-75°C
Maximum Operating Temperature+150°C
Shrunk Diameter Primary22.4mm
Shrunk Diameter Secondary8.5mm
Series222S152
ACG Industrial & Infrastructure Solutions
Kampala, Uganda  ·  Malatya, Turkey
http://agacangroup.com/product/electrical-items/cables-wires/cable-joints-cable-sleeving/heat-shrink-boots/te-connectivity-heat-shrink-boot-black-elastomer-adhesive-lined-36mm?mal=660eb936be5222810f115dbc
This document confirms the above specification is available in the ACG Industrial catalogue. Pricing and availability on request. Forward to your procurement team to initiate an RFQ.