Technical Specification Confirmation
PROCUREMENT & SUPPLY DECISION RECORD
Ref: ACG-SPEC-MQE7Y63M  ·  Generated: 14 Jun 2026
ACG AgaCanGroup
sales@agacaninvestment.com
agacangroup.com
HellermannTyton Cable Boot Black, Fluid Resistant Elastomer Adhesive Lined, 24mm
HellermannTyton
HellermannTyton Cable Boot Black, Fluid Resistant Elastomer Adhesive Lined, 24mm
Part No.
411-52023 1152-4-GW24-PO-X-BK
Procurement Intelligence
This is a HellermannTyton cable boot from their standard elastomer sleeving series, designed to provide strain relief and environmental sealing at cable terminations and breakouts. Installation involves heating to 135°C to activate the adhesive lining and achieve the specified shrink diameters. Critical verification: confirm the 24mm initial diameter matches your cable gauge and that thermal equipment can reliably achieve the shrink temperature.
Cable termination strain relief
Before ordering — verify:
☐ Adhesive activation temperature
☐ Fluid resistance rating
☐ Operating temperature range
Technical Specifications
TypeCable Boot
Inside Diameter Primary24mm
Inside Diameter Secondary24mm
Adhesive LinedYes
MaterialFluid Resistant Elastomer
Number of Breakouts1
Shrink Temperature+135°C
ColourBlack
Minimum Operating Temperature-75°C
Maximum Operating Temperature+150°C
Shrunk Diameter Primary10.5mm
Shrunk Diameter Secondary6mm
ACG Industrial & Infrastructure Solutions
Kampala, Uganda  ·  Malatya, Turkey
http://agacangroup.com/product/electrical-items/cables-wires/cable-joints-cable-sleeving/heat-shrink-boots/hellermanntyton-cable-boot-black-fluid-resistant-elastomer-adhesive-lined-24mm?mal=660eb89dbe5222810f10061e
This document confirms the above specification is available in the ACG Industrial catalogue. Pricing and availability on request. Forward to your procurement team to initiate an RFQ.