Technical Specification Confirmation
PROCUREMENT & SUPPLY DECISION RECORD
Ref: ACG-SPEC-MQEJIWQM  ·  Generated: 15 Jun 2026
ACG AgaCanGroup
sales@agacaninvestment.com
agacangroup.com
3M End Cap Black, Polyolefin Adhesive Lined, 20mm
3M
3M End Cap Black, Polyolefin Adhesive Lined, 20mm
Part No.
SKE8/20
Procurement Intelligence
The SKE series is a heat-shrink end cap assembly designed to seal and protect cable terminations in electrical installations. Installation requires heating to 121°C to activate polyolefin adhesive lining for permanent bonding. Critical verification: confirm 20mm inside diameter matches cable outer diameter specification to ensure proper shrink engagement.
Cable termination sealing protection
Before ordering — verify:
☐ Temperature activation requirement
☐ Adhesive bond confirmation
☐ Operating range validation
Technical Specifications
TypeEnd Cap
Inside Diameter Primary20mm
Inside Diameter (Primary)20mm
Inside Diameter Secondary20.1mm
Inside Diameter (Secondary)20.1mm
Adhesive LinedYes
MaterialPolyolefin
Shrink Temperature+121°C
ColourBlack
Minimum Operating Temperature-55°C
Maximum Operating Temperature+110°C
Shrunk Diameter (Primary)6.6mm
Shrunk Diameter Primary6.6mm
Shrunk Diameter (Secondary)7.6mm
Shrunk Diameter Secondary7.6mm
SeriesSKE
ACG Industrial & Infrastructure Solutions
Kampala, Uganda  ·  Malatya, Turkey
http://agacangroup.com/product/electrical-items/cables-wires/cable-joints-cable-sleeving/heat-shrink-boots/3m-end-cap-black-polyolefin-adhesive-lined-20mm?mal=660eb871be5222810f0f96cf
This document confirms the above specification is available in the ACG Industrial catalogue. Pricing and availability on request. Forward to your procurement team to initiate an RFQ.