Technical Specification Confirmation
PROCUREMENT & SUPPLY DECISION RECORD
Ref: ACG-SPEC-MQELY6VC  ·  Generated: 15 Jun 2026
ACG AgaCanGroup
sales@agacaninvestment.com
agacangroup.com
3M End Cap Black, Polyolefin Adhesive Lined, 10mm
3M
3M End Cap Black, Polyolefin Adhesive Lined, 10mm
Part No.
SKE4/10
Procurement Intelligence
The SKE4 series is a 3M adhesive-lined polyolefin heat shrink end cap designed for sealing and protecting 10mm cable terminations. Installation requires heating to +121°C activation temperature within the -55°C to +110°C operating range. Critical verification: confirm cable outer diameter matches 10mm primary specification to ensure proper shrink-down to 3.1mm.
Cable termination sealing protection
Before ordering — verify:
☐ Heat application method
☐ Adhesive cure time
☐ Cable diameter tolerance
Technical Specifications
TypeEnd Cap
Inside Diameter Primary10mm
Inside Diameter (Primary)10mm
Inside Diameter Secondary9.9mm
Inside Diameter (Secondary)9.9mm
Adhesive LinedYes
MaterialPolyolefin
Shrink Temperature+121°C
ColourBlack
Minimum Operating Temperature-55°C
Maximum Operating Temperature+110°C
Shrunk Diameter (Primary)3.1mm
Shrunk Diameter Primary3.1mm
Shrunk Diameter (Secondary)4.1mm
Shrunk Diameter Secondary4.1mm
SeriesSKE4
ACG Industrial & Infrastructure Solutions
Kampala, Uganda  ·  Malatya, Turkey
http://agacangroup.com/product/electrical-items/cables-wires/cable-joints-cable-sleeving/heat-shrink-boots/3m-end-cap-black-polyolefin-adhesive-lined-10mm?mal=660eb81dbe5222810f0ee4fe
This document confirms the above specification is available in the ACG Industrial catalogue. Pricing and availability on request. Forward to your procurement team to initiate an RFQ.