Plastic Pipe Fittings

PVC equal socket joins same-size 3/4-inch pipes together.

PVC tee fitting creates three-way branches from 3/4-inch pipe.

PVC threaded cap seals and closes 1/2-inch threaded pipe ends.

PVC socket cap closes and seals 1/2-inch pipe ends.

PVC adapter socket connects 32mm and 1-inch diameter pipes.

PVC tank adapter connects pipes to water tank threaded openings.

PVC threaded socket couples two 1/2-inch threaded pipe ports.

PVC pipe reducer bush fitting connects 20mm and 16mm pipes in water systems.

Polybutylene push-fit tee connector joins three 15mm pipes without tools.

PVC union fitting connects two 3/8 inch pipes with removable joint design.

ABS threaded socket fitting for 3/8 inch pipes in drainage systems.

PVC threaded plug caps off 2 inch pipes in water supply lines.

PVC equal socket joins two 2 inch pipes in a straight line.

PVC threaded plug seals off 3/4 inch pipes in plumbing installations.

PVC reducer bush connects 2 inch and 1 inch pipes for size transitions.

PVC 90 degree elbow bends 3/4 inch pipes at right angles.

ABS threaded adapter connects 1.25 inch pipes with cement joint method.

PVC 90 degree elbow for large 3 inch pipes in main water lines.

Legris push-fit banjo connector joins 4mm tubing to 1/8 inch thread ports.

JG Speedfit CPVC adapter connects 22mm pipes to 3/4 inch BSP threads.

PVC 90 degree elbow for 40mm pipes in water distribution systems.

ABS union fitting connects two 3/4 inch pipes with cement joining method.

PVC equal socket joins two 63mm large diameter pipes in main lines.

CPVC 90 degree elbow for 32mm hot water pipes with chlorine resistance.

ABS union fitting connects two 1/2 inch pipes using cement bonding.

ABS 90 degree elbow for 1.5 inch pipes in drainage and sewage lines.

PVC reducer bush connects 40mm and 32mm pipes for size transitions.

PVC pipe union connector for joining 50mm pipes in water systems.

PVC tee fitting for 32mm pipes to split flow in three directions.

ABS tee fitting for 1-inch pipes with cement joint connection.

ABS tee fitting for 1.5-inch pipes with cement-on socket.

Threaded ABS adapter for connecting 1.5-inch pipes.

ABS union fitting for joining 2-inch pipes in water systems.

Threaded PVC plug to cap off 1-inch pipe ends.

PVC adapter socket for connecting 25mm pipes to threaded fittings.

PVC cap to seal off the end of 2-inch pipes.

PVC adapter socket for connecting 40mm pipes to threaded fittings.

Threaded ABS adapter for connecting 1.25-inch pipes.

PVC nipple with threads on both ends for connecting pipes.

PVC adapter with cement socket and threaded end for mixed connections.

ABS tee fitting for 1.25-inch pipes with cement connection.

PVC equal tee for 63mm pipes to branch flow in three directions.

PVC threaded fitting for 3/4-inch pipes.

EPDM rubber gasket for sealing 80mm pipe flanges.

Push-fit plastic elbow for connecting 1/4-inch tubes.

Push-fit adapter for connecting 15mm pipes to water taps.

PVC cap to seal off the end of 20mm pipes.

Push-fit CPVC equal tee connector for 15mm pipes in plumbing systems.

PVC cap fitting to close 25mm pipes at the end of plumbing runs.

ABS threaded adapter connecting two 3/4 inch pipe sections together.

PVC 45-degree elbow bend for changing pipe direction on 1-inch lines.

Push-fit CPVC adapter connecting 22mm pipes to tap water outlets.

CPVC 90-degree elbow for right-angle pipe turns on 20mm lines.

PVC threaded adapter joining two 1/2 inch pipe sections with threading.

EPDM rubber gasket seal for 1-inch pipe flange connections.

PVC reducer bush stepping down from 1.5 inch to 3/4 inch pipes.

PVC threaded nipple connecting two 1.25 inch threaded pipe sections.

PVC reducer bush stepping down from 2 inch to 1.25 inch pipes.

CPVC 90-degree tee connector for 40mm pipes in plumbing networks.

Push-fit slip tee junction for 22mm pipes in water distribution.