Plastic Pipe Fittings

CPVC ninety-degree tee junction for twenty millimeter pipes.

PVC cap for sealing one-and-half-inch pipes.

Large ABS socket for cementing three-inch plastic pipes.

ABS ninety-degree elbow for one-and-quarter-inch pipe bends.

Push-fit reducer tee junction for twenty-two millimeter pipes.

Push-fit tap adapter connecting twenty-two millimeter pipe to faucet.

CPVC ninety-degree elbow for fifty millimeter pipe routing.

PVC 90-degree elbow fitting for 25mm pipes with threaded connections.

Straight PVC socket fitting for half-inch pipes with dual threaded connections.

Straight PVC adapter connecting 32mm cemented pipe to one-inch thread.

ABS 90-degree elbow for half-inch pipes using cement connection method.

Short PVC threaded nipple for three-quarter-inch pipes joining two fittings.

Straight ABS adapter for one-inch threaded pipes connecting two fittings.

Straight ABS socket fitting for three-quarter-inch threaded pipes.

PVC reducer bush stepping down from 32mm to 20mm pipes.

PVC 45-degree elbow for 20mm pipes using cement connection.

Threaded PVC reducer stepping down from 1.25 inches to one inch.

Small PVC socket fitting for quarter-inch threaded pipes.

ABS reducer bush stepping down from two inches to 1.5 inches.

PVC reducer bush stepping down from 40mm to 20mm pipes.

Medium PVC threaded nipple for one-inch pipes joining two fittings.

Straight PVC socket fitting for one-inch threaded and cemented pipes.

PVC reducer bush stepping down from 50mm to 32mm pipes.

PVC equal tee for three-eighth-inch pipes with 90-degree branching.

ABS straight union fitting for 1.5-inch pipes allowing easy disconnection.

PVC 90-degree threaded elbow for 20mm pipes with half-inch thread.

EPDM rubber gasket for 100mm pipe flanges providing watertight seals.

Push-fit acetal tee connector for quarter-inch plastic water pipes.

Ninety-degree ABS plastic elbow for one-inch diameter water and drainage pipes.

PVC ninety-degree elbow for fifty-millimetre diameter plastic water pipes.

PVC reducer fitting to connect forty-millimetre pipes to twenty-millimetre pipes.

CPVC ninety-degree tee fitting for twenty-five-millimetre pipe branching.

PVC socket coupler for joining two fifty-millimetre diameter plastic pipes.

PVC ninety-degree elbow for half-inch diameter water pipes.

ABS socket with threaded connection for two-inch diameter pipes.

Push-fit CPVC end cap for twenty-two-millimetre plastic water pipes.

PVC threaded reducer fitting from two-inch to one-point-five-inch pipes.

PVC tank adapter with threaded connection for water tank installation.

Single banjo push-fit connector for six-millimetre pneumatic or water lines.

Twin banjo brass connector for eight-millimetre pneumatic line branching.

Push-fit rigid polymer elbow for pneumatic air lines with male thread.

PVC straight coupler for joining two twenty-five-millimetre plastic pipes.

Push-fit acetal stem elbow for quarter-inch water pipe branching.

Push-fit CPVC straight coupler for twenty-two-millimetre plastic water pipes.

PVC cap for sealing and closing thirty-two-millimetre plastic water pipes.

PVC socket coupler for joining two twenty-millimetre diameter plastic pipes.

PVC socket coupler for joining two forty-millimetre diameter plastic pipes.

ABS threaded adapter for connecting half-inch pipes in water systems.

PVC tank adapter for 25mm pipes, cemented connection for water storage.

Push-fit coupler for joining 15mm water pipes without tools or glue.

90-degree PVC elbow for 1.25-inch pipes, changes pipe direction.

PVC adapter socket for 20mm pipes with half-inch threaded connection.

ABS full-face flange for 1.5-inch pipes, enables bolt connections.

45-degree CPVC elbow for 32mm pipes, angles pipe connections.

45-degree CPVC elbow for 20mm pipes, angles smaller pipe connections.

ABS tee fitting for 3/4-inch pipes, splits water flow in three directions.

Push-fit tee for 15mm pipes, splits water flow without glue.

Polymer banjo fitting for 6mm tubes, connects to quarter-inch ports.

Grey PVC angled elbow for 16.9mm conduit tubes, routes cables.

Threaded PVC tee for 25mm pipes, splits flow with three-quarter-inch port.