Brass Pipe Fittings
601–660 of 683 products — Browse specifications below, then submit an RFQ
Brass 90° compression elbow for connecting quarter-inch and four-millimetre pipes.
Brass threaded adapter with barbed tail for connecting three-eighth-inch and nineteen-millimetre pipes.
Brass tailpiece adapter with barbed end for three-quarter-inch threaded connections.
Brass straight adapter reducing half-inch thread to one-eighth-inch connection.
Brass nipple for connecting two pipes or fittings end-to-end.
Brass flow adapter rated to 16 bar for half-inch pipe connections.
Brass push-fit reducer tee splitting 22mm pipe into main and 15mm branch.
Brass compression fitting for secure no-thread pipe connections.
Brass elbow wall tap with nut for half-inch outdoor or wall-mounted connections.
Brass connector for low-pressure quarter-inch pipes in pneumatic and water systems.
Brass three-way fitting for three-quarter-inch pipes in water and gas systems.
Brass compression pipe fitting for connecting and sealing pipes in plumbing systems.
Brass compression fitting for connecting and securing pipes in plumbing and industrial systems.
Brass tee pipe fitting with drain tap for 15mm water lines and drainage systems.
Brass threaded pipe adapter connecting 3/8 inch to 12mm for fluid systems.
Brass tee connector for 15mm pipes, quick push-fit installation without tools.
Brass 90-degree elbow connector for 22mm pipes, push-fit installation, no tools required.
Brass elbow pipe fitting with threaded connections for wall-mounted water tap installation.
Brass straight flow adapter for connecting industrial pipes and fluid systems safely.
Brass equal tee splitter for three-quarter-inch female-threaded pipes.
Brass barbed adapter connecting one-inch male thread to twenty-five millimetre tubing.
Brass push-fit street elbow for joining fifteen millimetre pipes at ninety degrees.
Brass barbed adapter connecting one-eighth-inch male thread to four millimetre tubing.
Brass tee adapter connecting half-inch and quarter-inch mixed-thread pipes.
Brass equal tee splitter for three-eighth-inch female-threaded pipes.
Brass push-fit service valve for controlling flow in fifteen millimetre pipelines.
Brass threaded tailpiece adapter connecting half-inch threads to thirteen millimeter pipe.
Straight brass coupler for connecting identical diameter pipes.
Brass compression coupler connecting half-inch male thread to ten millimeter pipe.
Brass barbed tailpiece adapter connecting one-eighth inch thread to six millimeter pipe.
Brass flow adapter for one-inch pipes rated to sixteen bar pressure.
Brass threaded adapter reducing half-inch to one-eighth inch connections.
Brass push fit taper coupler joining half-inch thread to fifteen millimeter pipe.
Brass nipple fitting for three-quarter inch pipes rated to twenty bar.
Brass barbed tailpiece adapter connecting half-inch thread to nineteen millimeter pipe.
Brass tailpiece adapter joins half-inch thread to 16mm tubing.
Brass compression bulkhead coupler joins 12mm tubing through walls.
Brass push-fit taper coupler joins threaded and 22mm pipes.
Brass ninety-degree elbow changes pipe direction on small threads.
Brass bulkhead fitting mounts through walls on quarter-inch threads.
Brass half-inch coupler joins female threaded pipes together.
Brass eighth-inch coupler connects two female threaded ports.
Brass compression fitting connects tubing without threading.
Brass push-fit tee splits or joins three 22mm pipes.
Brass elbow wall tap mounts half-inch connections to walls.
Brass straight coupler for connecting pipes in industrial plumbing and pipeline systems.
Brass pipe end stop fitting for 22mm push-fit plumbing systems and water networks.
Brass elbow coupler for connecting angled copper or steel pipes in plumbing systems.
Brass 90-degree elbow connector for joining pipes at right angles in plumbing systems.
Brass bulkhead connector for mounting through panel walls in fluid systems.
Brass flow measurement device installed directly in pipelines for volume monitoring.
Brass angled connector for changing pipe direction in half inch plumbing lines.
Brass angled connector for changing pipe direction in 3/8 inch fluid lines.
Small brass elbow with compression fitting for 4mm plastic tubing in pneumatic systems.
Brass elbow adapter combining 1/2 inch thread with 16mm compression for mixed systems.
Brass elbow adapter joining 3/8 inch thread to 12mm compression tubing.
Brass push-fit angled connector for 15mm pipes, quick installation without tools.
Brass bulkhead coupler for mounting 4mm tubing through panel walls in fluid systems.
Brass three-way splitter connecting three 1/2 inch pipes in plumbing systems.
Brass threaded adapter connecting 1/8 inch male pipe to 7mm barbed fitting for fluid systems.
Buy Brass Pipe Fittings — Industrial Supply & Procurement
Browse 683 Brass Pipe Fittings products available for procurement through AgaCanGroup. Top brands include Legris, RS PRO, Pegler Yorkshire, Watts, Norgren. All products are available via RFQ — submit your specification and ACG will respond within 24 hours with pricing, availability and delivery options. ACG serves procurement teams across Africa, the Middle East and South Asia.