Pilot Lights
241–300 of 567 products — Browse specifications below, then submit an RFQ
A waterproof yellow LED indicator light that mounts on control panels to show machine or system status, powered by 24V supply.
A red LED indicator light that mounts on control panels to show equipment status or alert operators, rated for 230V AC power.
A red LED indicator light that mounts on control panel cutouts to show equipment status or alarm conditions, rated for 24V operation.
A green indicator light that mounts on control panels to show when equipment is running or operational, sealed against dust and water.
A blue indicator light that mounts on control panels to show equipment status, sealed against dust and water spray.
A small rectangular LED indicator light that mounts into control panel holes to show machine status or operational state.
A white LED pilot light that mounts in a 22mm hole and signals equipment status in dusty or wet industrial environments; works on standard AC power from 85 to 264 volts.
A white LED indicator light that mounts on control panels to show equipment status, rated for 400V industrial power supplies.
A yellow LED indicator light that mounts on control panels to show machine status or process conditions, rated for wet and dusty environments.
A white indicator light that mounts on control panels to show equipment status; dust and water resistant for factory and outdoor use.
A red LED indicator light that mounts flush on control panels to signal equipment status or alarms, with waterproof protection suitable for wet environments.
A white LED indicator light that mounts on control panel doors to show machine status or equipment condition.
A white LED indicator light that mounts on control panels to show when equipment is running or in a particular state, powered by 230V electricity.
A yellow LED indicator light that mounts flush into a 22mm panel hole and works with 12 to 30 volt electrical systems, commonly used on control panels and machinery to show operational status.
A blue LED indicator light that mounts into a 22mm panel cutout and runs on 24V power, used to show equipment status on control panels.
A white LED indicator light that mounts on control panel cutouts to show machine or process status on 110V electrical systems.
A weatherproof LED indicator light that mounts on control panels to show machine status in three colors (green, red, yellow), rated for 400V industrial use.
A green LED indicator light that mounts on DIN rail and shows status in control panels and electrical enclosures at 48V.
A red LED indicator light that mounts on control panels to show equipment status, rated for wet and dusty environments.
A white LED indicator light that mounts on control panels to show equipment status, rated for 24V power and sealed against dust and water spray.
A green LED indicator light that mounts on control panels to show equipment status or operating conditions, rated for 230V AC power.
A blue LED pilot light that mounts on control panels to show when equipment is running or ready, powered by 120V electricity.
A red LED indicator light that mounts on control panels to show machine or system status, rated for wet and dusty environments.
A yellow LED indicator light that mounts on control panels to show equipment status, sealed against dust and water for harsh industrial environments.
A green round indicator light that shows when a machine or system is running or active.
A waterproof yellow LED indicator light that mounts into control panels to show equipment status, rated for harsh wet and dusty environments.
A blue indicator light that mounts into a 30mm hole on control panels to show equipment status or operation mode, rated for wet and dusty environments.
A white LED indicator light that mounts on control panel cutouts to show machine or equipment status at 110V AC power.
A green LED indicator light that mounts in an 8mm hole and shows status on control panels, suitable for both dry and wet environments.
A white LED indicator light that mounts on control panels to show equipment status, powered by 240V electricity.
A red warning light that mounts directly onto control panel cutouts to show when equipment is running or an alarm is active.
A red LED indicator light that mounts on control panels to show equipment status or alarms, rated for wet and dusty environments.
A bright yellow LED pilot light that mounts flush into a 22mm hole on industrial control panels to show equipment status, rated for harsh wet and dusty environments.
An orange LED indicator light that mounts on control panels to show equipment status, rated for wet and dusty environments.
A white LED indicator light that mounts on control panel doors to show equipment status, rated for dusty and wet industrial environments.
A yellow LED indicator light that mounts on control panel doors to show equipment status, sealed against water and dust in harsh environments.
A white LED indicator light that mounts into a 22mm hole on control panels and equipment to show operational status, powered by standard 230V AC electricity.
A yellow LED indicator light that mounts on control panels to show equipment status or alarms, powered by 24V electricity.
A blue LED indicator light that mounts on control panel cutouts to show machine status or alarm conditions in factories and plants.
A green LED indicator light that mounts on control panel cutouts to show operational status or equipment readiness in industrial machinery and electrical cabinets.
A blue LED indicator light that mounts on control panels to show equipment status or operating conditions, powered by 24V electricity.
A blue LED indicator light that mounts flush into a 22mm hole in control panels to show equipment status or operating state.
A white indicator light that mounts on control panel cutouts to show when equipment is running or in a particular state.
A green LED indicator light for mounting on control panels that shows system status or readiness, rated for wet environments.
A green LED indicator light that mounts on control panels to show equipment status, rated for wet environments and powered by 24V.
A rugged red LED indicator light that mounts on control panels to show equipment status, sealed against dust and water spray for outdoor and wet industrial areas.
A red LED indicator light that mounts on control panels to show equipment status, rated for wet and high-pressure wash environments.
A white LED indicator light that mounts into a 22mm hole in control panel doors to show machine status or operational state, powered by standard 230V electricity.
A red LED indicator light that mounts in control panels to show machine status, rated for 400V industrial use with weatherproof protection.
A waterproof white LED indicator light that mounts in a 22mm hole on control panels and machinery to show operational status, rated for extreme dust and water exposure.
A green LED indicator light that mounts on control panels to show equipment status or operational state, rated for wet and dusty environments.
A red indicator light that mounts on control panel doors to show equipment status, rated for wet environments and powered by 24V electricity.
A white LED indicator light that mounts in a 30mm hole and signals equipment status in wet or dusty environments, rated for 24V power.
A red LED indicator light that mounts on control panels to show machine or process status, rated for wet and dusty environments.
A red LED indicator light for control panels and machinery that shows operational status, rated for 12V and protected against dust and water spray.
White LED indicator light that mounts on control panels to show equipment status, powered by 24V electricity.
A blue LED indicator light that mounts flush into a 30mm hole on control panels and machinery to show operational status, powered by standard AC mains voltage.
A yellow LED indicator light that mounts on control panels to show machine status and operational states, powered by 110V electricity.
A red LED pilot light that mounts flush into a 30mm panel hole to show when equipment is running or in a specific state, powered by low-voltage DC or AC current.
A blue LED indicator light that mounts on control panels to show system status or equipment condition, rated for wet and dusty industrial environments.
Buy Pilot Lights — Industrial Supply & Procurement
Browse 567 Pilot Lights products available for procurement through AgaCanGroup. Top brands include Schneider Electric, RS PRO, Siemens, Eaton, Lovato. All products are available via RFQ — submit your specification and ACG will respond within 24 hours with pricing, availability and delivery options. ACG serves procurement teams across Africa, the Middle East and South Asia.