Key Switch Heads
481–520 of 541 products — Browse specifications below, then submit an RFQ
A rugged 3-position key-operated selector switch for industrial control panels, designed to withstand harsh wet and dusty environments.
A rugged industrial key switch for controlling machinery and equipment in wet or dusty environments, mounted through a 30mm hole with 2 positions and latching action.
A rugged three-position key-operated selector switch for industrial control panels that locks in place when turned and resists water and dust.
A heavy-duty 2-position key-operated switch for controlling machinery, with weatherproof ratings suitable for industrial panels and outdoor enclosures.
A heavy-duty 3-position key-operated switch head that mounts in a 22mm panel cutout and returns to center when released, commonly used for emergency stop and mode selection in industrial machinery.
A rugged 2-position latching key switch for industrial control panels and machinery, allowing operators to select between two states and lock the position until the key is turned again.
A rugged 2-position key-operated selector switch with waterproof sealing, used to control machinery startup and shutdown on factory floors and construction sites.
A heavy-duty key-operated selector switch with spring return for industrial control panels and machinery, rated for extreme weather and washdown environments.
A weatherproof 3-position key switch for controlling industrial equipment, mounted in a 22mm panel cutout with key-operated latching action.
A rugged 2-position key-operated latching switch with 30mm panel cutout, designed for secure equipment control in wet and harsh industrial environments.
A rugged 3-position key-operated selector switch with spring return to centre, designed for industrial control panels and equipment where operator access needs to be restricted or monitored.
A heavy-duty 2-position key-operated selector switch for industrial machinery and control panels, switched on and off with a standard key.
A robust 3-position key switch with spring return to centre that installs in a 22mm panel cutout, commonly used for equipment start/stop and mode selection on machinery and control panels.
A heavy-duty industrial key switch with three positions for controlling machinery and equipment, rated for wet and dusty environments.
A rugged latching key switch head used to control machinery and equipment with a physical key, suitable for outdoor and harsh industrial environments.
A heavy-duty 3-position key-operated switch for controlling industrial equipment, designed to work in wet and harsh environments.
A durable 3-position key-operated switch head for controlling machinery and systems in industrial environments, with protection against dust and water spray.
A 22mm industrial key switch with 2 positions that stays in place when turned, used to control machinery and equipment in factories and outdoor installations.
A 22mm latching key switch for controlling industrial machinery, with sealed weatherproof design suitable for outdoor or harsh environments.
A 2-position key switch head from Eaton that allows operators to select between two settings using a removable key, commonly used on industrial control panels and machinery.
A robust industrial key-operated switch head with two positions and momentary action, designed to fit standard 22.5mm panel cutouts and rated for wet, dusty environments.
A 3-position latching key switch that mounts in a 22mm panel cutout, used to control equipment startup and mode selection in industrial facilities.
A robust 3-position key switch for industrial control panels that locks in place and requires a key to operate, rated for harsh outdoor and wet environments.
A durable industrial key-operated switch for controlling machinery and equipment, installed in a 16mm panel cutout with protection against dust and water spray.
A rugged 3-position key-operated switch for industrial machinery and control panels that returns to center when released, sealed against dust and water.
A rugged 2-position key switch with latching action that stays in place when turned, rated IP65 for dust and water protection, used to control machinery and equipment safely.
A rugged 3-position key-operated switch for industrial control panels that stays in the position you set it until you move it again.
A rugged 2-position key switch that stays in place when turned, rated for dusty and wet environments, commonly used to control machinery and equipment on industrial sites.
A rugged 2-position key-operated latching switch with a 30mm mounting hole, designed for secure access control and equipment lockout in industrial and outdoor environments.
A rugged key-operated selector switch with 2 positions that mounts in a 23mm hole on control panels to safely start or stop equipment, commonly used in factories and construction sites.
A heavy-duty 3-position key switch head for industrial control panels that activates momentarily when turned, with weatherproof sealing for harsh environments.
A two-position latching key switch head used to control machinery and equipment in industrial and hazardous locations, operated by turning a key and holding its position until manually changed.
A heavy-duty 2-position key switch for industrial control panels that stays in the selected position until manually switched back.
A durable 2-position key switch with spring return action for industrial control panels and machinery, rated for harsh wet and dusty environments.
A weatherproof three-position key-operated selector switch with latching action, used to control industrial machinery and equipment with a secure lock mechanism.
A rugged industrial key-operated selector switch with two positions and momentary action, used in control panels and machinery for operator-initiated functions.
A rugged 3-position key-operated switch with spring return to centre, rated for wet and dusty industrial environments, commonly used to control machinery and equipment on construction and factory sites.
A heavy-duty industrial key switch with 3 positions and weatherproof rating, used to control machinery and equipment in wet or harsh environments.
A two-position latching key switch with a 22mm panel cutout, used to control machinery and equipment operation with key-based access control in industrial settings.
A rugged three-position key switch with momentary action for controlling machinery and equipment in wet or dusty industrial environments.
Buy Key Switch Heads — Industrial Supply & Procurement
Browse 541 Key Switch Heads products available for procurement through AgaCanGroup. Top brands include Siemens, Schneider Electric, Eaton, RS PRO, Idec. All products are available via RFQ — submit your specification and ACG will respond within 24 hours with pricing, availability and delivery options. ACG serves procurement teams across Africa, the Middle East and South Asia.