DIN Rail Terminal Blocks
1021–1080 of 1,997 products — Browse specifications below, then submit an RFQ
A certified electrical connector for wiring in hazardous areas like oil rigs and chemical plants, rated for medium-sized cables with safe screw connections.
A safety-certified connector block for wiring electrical equipment in dangerous areas like oil refineries, tested and approved for explosive atmospheres.
Blue screw-clamp connector that mounts on industrial control panel rails for safely joining electrical wires up to 4mm thick.
Industrial screw-type connector block for mounting on DIN rail, suitable for electrical wiring up to 2.5mm² cable and 24 amps.
A blue electrical terminal block that mounts on standard DIN rail and securely connects wires up to 6mm thick in industrial control panels.
A beige electrical connector block that mounts on standard DIN rails and safely terminates multiple wires using screw clamps for control panels and automation cabinets.
A certified electrical connector block for dangerous environments like oil rigs and chemical plants, designed to safely join wires in areas where explosions could occur.
A blue electrical connector block that safely joins wires in dangerous environments like oil rigs and chemical plants, with official safety approval.
A yellow screw-type electrical connector block certified safe for explosive atmospheres, rated for 32 amps and thick wiring.
A heavy-duty grey terminal connector block for safely wiring large industrial cables in explosive or chemical environments, rated for high current and certified for safety.
A certified white connection block for safely wiring electrical circuits in explosive atmospheres, rated for 4mm cables and 41 amps.
A blue electrical connector block that screws onto DIN rail to safely connect industrial wiring up to 41 amps and 800 volts.
Industrial electrical connector block that lets you pass wires through and connect them safely in control panels.
A beige fused electrical connector that screws onto DIN rail in control panels, rated for up to 6.3A, with built-in protection and space for two wire levels.
A protected electrical connector that screws onto DIN rail, blocks overcurrent, and handles up to 400V and 6.3 amps.
Blue push-in electrical connector block for industrial control panels and machinery wiring, rated 500V and 17.5A.
A blue industrial connector block that safely joins wires in control panels and machines, rated for 500 volts and 17.5 amps.
A three-layer electrical connector block that mounts on DIN rail and uses screw terminals to securely connect wires in control panels.
A grounding block for dangerous locations that safely connects earth wires in explosive zones using simple screw connections.
Brown two-level terminal block for connecting wires in electrical control panels, rated for 400 volts and 10 amps.
A safety-certified electrical connector block with built-in fuse protection, designed for use in dangerous environments where explosions could occur.
A specially approved electrical connector block for dangerous areas where explosive gases or dusts may be present, rated for 6mm² cables with a screw connection method.
A blue electrical connector that clamps onto DIN rails to safely connect 4mm wires in control panels and machinery, rated for high voltage and temperature.
A beige electrical terminal block that connects wires onto DIN rails using screw fasteners, rated for up to 24 amps and 500 volts.
A brown fused electrical connector block that mounts on DIN rails in control panels and industrial machines to safely join wires with built-in circuit protection.
A heavy-duty industrial terminal block that safely connects large electrical cables to DIN rail in control panels and machinery.
Brown electrical terminal block for safely connecting 4mm² wires in industrial control panels using a simple screw clamp method.
A blue screw-type terminal block for connecting wires in industrial control panels, rated to handle 24 amps safely.
Black screw-clamp electrical terminal block that connects wires up to 10mm thick and handles 57 amps in industrial control panels.
Double-stacked brown electrical terminal block that lets you connect two wires per position using a screw, rated for industrial panel work.
A certified electrical connector block for dangerous areas like oil rigs and mines, where explosions are a risk.
A heavy-duty electrical terminal block for connecting large industrial cables inside control panels and machinery, with screw fastening and high current capacity.
Blue screw-type electrical terminal block for connecting 6mm wires in industrial control panels, rated for 800 volts and 57 amps.
A black electrical connector block that mounts on DIN rail and lets you safely connect multiple signal wires without tools.
A blue safety connector for wiring in dangerous explosive areas, with push-button connection and special certification for oil and gas work.
A specialized electrical connector block approved for use in dangerous or explosive environments, allowing safe and quick cable connections.
Certified safety terminal block for connecting electrical wires in explosive or dangerous areas, rated for high temperature and pressure environments.
A heavy-duty brown electrical connector block that mounts on DIN rail and safely handles large power cables up to 35mm² in industrial control panels.
A certified electrical connector block for dangerous areas like oil rigs and mines, designed for safe wire connections.
Industrial electrical connector block that safely joins wires in control panels and automation equipment.
Red ATEX-approved electrical terminal block for safe wiring in explosive or hazardous industrial environments.
A two-tier industrial electrical connector block that screws onto DIN rail, used to safely join and organize wiring in control panels and machines.
Beige electrical terminal block that connects and disconnects wires safely in control panels and machinery, handling up to 32 amps at 500 volts.
A heavy-duty electrical connector block for dangerous industrial areas like oil refineries and chemical plants, certified safe for explosive gas environments.
A safety-certified fuse connector block for dangerous work areas like oil rigs and chemical plants, with quick push-in wire connection and built-in protection.
A brown electrical connector block for wiring circuits on DIN rails, rated for 57 amps and 500 volts.
A certified electrical connector block for connecting wires in explosive or hazardous work zones like oil rigs and chemical plants.
A blue two-tier electrical connector block that screws onto DIN rails for safely joining wires in control panels and industrial machines.
A snap-on electrical connector block used to quickly wire and distribute power or signals in industrial control panels and machinery.
A snap-on electrical connector block that mounts on standard DIN rail to organize and distribute electrical connections in machinery and control panels.
A standard industrial electrical connector block that mounts on DIN rails and uses bolts to secure wires for control panels and machinery.
A safety-approved electrical connector block for dangerous environments like oil rigs and chemical plants, certified to work safely in explosive atmospheres.
A special electrical connector block approved for dangerous gas and dust areas, rated for high voltage and current with safety fusing built in.
An ATEX-certified white terminal block for safely connecting electrical wires in dangerous areas with explosive gases or dust.
A certified safety connector block for dangerous environments like oil rigs and chemical plants that uses screw connections to hold wires securely in place.
A snap-on connector block that securely connects wires in industrial control panels and automation systems.
A single-channel electrical terminal block that snaps onto standard DIN rail to connect and distribute electrical wires in industrial panels and machinery.
A blue electrical connector block that snaps onto DIN rails for wiring industrial control panels and machines.
A screw-clamp terminal block for connecting electrical wires in control panels and machinery, rated for 57 amps at 630 volts.
A beige two-layer electrical connector block that screws onto control panel rails to safely join and distribute wires in machinery and electrical systems.
Buy DIN Rail Terminal Blocks — Industrial Supply & Procurement
Browse 1,997 DIN Rail Terminal Blocks products available for procurement through AgaCanGroup. Top brands include Weidmüller, Phoenix Contact, Siemens, RS PRO, Entrelec. All products are available via RFQ — submit your specification and ACG will respond within 24 hours with pricing, availability and delivery options. ACG serves procurement teams across Africa, the Middle East and South Asia.