ACG
Loading
PART OF THE NOVA PLATFORM ECOSYSTEM · KAMPALA, UGANDA · MALATYA, TURKEY
Browse by Department
Services About Contact
Submit RFQ →

Motor Accessories

161–200 of 398 products — Browse specifications below, then submit an RFQ

398 products
Filters
Showing 161–200 of 398 products
Per page: 20 40 60
ABB Enclosure for Use with MS116, MS132, 195mm Length
ABB ABB Enclosure for Use with MS116, MS132, 195mm Length Part: 1SAM201911R1011 IB132-Y

ABB protective enclosure for MS116 and MS132 motor starters.

Accessory Type: Enclosure For Use With: MS116, MS132 Length: 195mm
ABB Motor Protection Unit
ABB ABB Motor Protection Unit Part: 1SAM301901R1001

ABB motor protection unit with short-circuit signaling capability.

Accessory Type: Short-Circuit Signaling Switch
ABB Mounting Kit
ABB ABB Mounting Kit Part: 1SAM201912R1011

ABB mounting kit for motor starter enclosure assembly and installation.

Enclosure Mounting Type: Mounting Kit
ABB Power Cable for Use with MO132, MS116, MS132, 35.3mm Length, 3-Phase, 690 V
ABB ABB Power Cable for Use with MO132, MS116, MS132, 35.3mm Length, 3-Phase, 690 V Part: 1SAM201913R1103 S1-M3-35

Three-phase power cable connector for ABB motor starters, 690 volts.

Accessory Type: 3-Phase Power Infeed Block For Use With: MO132, MS116, MS132 Voltage Range: 690 V
Crouzet Terminator for Use with Brushless DC Motor
Crouzet Crouzet Terminator for Use with Brushless DC Motor Part: 27358014

Terminating resistor for brushless DC motor communication networks.

Accessory Type: CAN Terminating Resistor For Use With: Brushless DC Motor
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-A-D32-42A-S1

Mounting kit for Festo electromechanical drive systems.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-A-D40-57A-S1

Mounting kit for Festo electromechanical drive systems.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Schneider Electric Altivar Series Braking Resistor for Use with ATV340, ATV900, 100mm Length, 0.5 kW, 24 V, 250 V
Schneider Electric Schneider Electric Altivar Series Braking Resistor for Use with ATV340, ATV900, 100mm Length, 0.5 kW, 24 V, 250 V Part: VW3A7741

Braking resistor for Schneider Altivar variable frequency drives.

Accessory Type: Braking Resistor For Use With: ATV340, ATV900 Voltage Range: 24 V, 250 V
Schneider Electric Altivar Series Braking Resistor for Use with ATV340, ATV900, 650mm Length, 6.9 kW, 24 V, 250 V
Schneider Electric Schneider Electric Altivar Series Braking Resistor for Use with ATV340, ATV900, 650mm Length, 6.9 kW, 24 V, 250 V Part: VW3A7746

High-power braking resistor for Schneider Altivar variable frequency drives.

Accessory Type: Braking Resistor For Use With: ATV340, ATV900 Voltage Range: 24 V, 250 V
Schneider Electric Altivar Series Motor Choke for Use with Altivar 61, Altivar 61Q, Altivar 71, Altivar 71Q, ATV600,
Schneider Electric Schneider Electric Altivar Series Motor Choke for Use with Altivar 61, Altivar 61Q, Altivar 71, Altivar 71Q, ATV600, Part: VW3A5106

Motor choke inductor for Schneider Altivar variable frequency drives.

Accessory Type: Choke For Use With: Altivar 61, Altivar 61Q, Altivar 71, Altivar 71Q, ATV600, ATV900 Current Rating: 481 A
Schneider Electric Altivar Series Motor Protection Unit for Use with ATV630, ATV930
Schneider Electric Schneider Electric Altivar Series Motor Protection Unit for Use with ATV630, ATV930 Part: VW3A9706

Protective housing for Schneider Altivar variable frequency drives.

Accessory Type: Protective Housing For Use With: ATV630, ATV930 Series: Altivar
Schneider Electric Altivar Series Mounting Kit for Use with ATV12, ATV320
Schneider Electric Schneider Electric Altivar Series Mounting Kit for Use with ATV12, ATV320 Part: VW3A9524

EMC conformity kit for Schneider Altivar small drives.

Accessory Type: EMC Conformity Kits Size 2 For Use With: ATV12, ATV320 Series: Altivar
Schneider Electric Altivar Series Mounting Kit for Use with ATV320
Schneider Electric Schneider Electric Altivar Series Mounting Kit for Use with ATV320 Part: VW3A95811

UL type conformity kit for Schneider Altivar 320 drives.

Accessory Type: Kit for UL type 1 conformity For Use With: ATV320 Series: Altivar
Schneider Electric Altivar Series Mounting Kit for Use with ATV320
Schneider Electric Schneider Electric Altivar Series Mounting Kit for Use with ATV320 Part: VW3A9532

EMC conformity kit for Schneider Altivar 320 variable frequency drives.

Accessory Type: EMC Conformity Kit For Use With: ATV320 Series: Altivar
Schneider Electric Altivar Series Mounting Plate for Use with ATV320
Schneider Electric Schneider Electric Altivar Series Mounting Plate for Use with ATV320 Part: VW3A9911

Mounting plate for Schneider Altivar 320 variable frequency drives.

Accessory Type: Mounting Plate For Use With: ATV320 Series: Altivar
Schneider Electric VW3 Series Power Cable for Use with Servo Motor, 10m Length
Schneider Electric Schneider Electric VW3 Series Power Cable for Use with Servo Motor, 10m Length Part: VW3M5103R100

Ten-meter power cable for Schneider servo motors.

Accessory Type: Power Cable For Use With: Servo Motor Length: 10m
Siemens 6SL3261 Series Mounting Plate
Siemens Siemens 6SL3261 Series Mounting Plate Part: 6SL3261-6GF00-0BA0

Mounting frame for Siemens motor control equipment.

Accessory Type: Frame For Use With: Motor Series: 6SL3261
Siemens 6SL3264 Series Motor Protection Unit
Siemens Siemens 6SL3264 Series Motor Protection Unit Part: 6SL3264-1EA00-0FA0

Shield connection kit for Siemens motor drive cables.

Accessory Type: Shield Connection Kit For Use With: Motor Series: 6SL3264
Siemens 6SL3266 Series Cover
Siemens Siemens 6SL3266 Series Cover Part: 6SL3266-1PD00-0BA0

Protective cover for Siemens motor drive equipment.

Accessory Type: Cover For Use With: Motor Series: 6SL3266
SpaceLogic KNX Series Hand Switch for Use with SpaceLogic KNX, Single-Phase, 230 V
Schneider Electric SpaceLogic KNX Series Hand Switch for Use with SpaceLogic KNX, Single-Phase, 230 V Part: MTN6003-0012

Hand-operated switch for SpaceLogic KNX building automation systems.

Accessory Type: Switch Actuator For Use With: SpaceLogic KNX Voltage Range: 230 V
Siemens SIRIUS Series Cable
Siemens Siemens SIRIUS Series Cable Part: 3UF7941-0AA00-0

Control cable for Siemens SIRIUS motor control equipment.

Accessory Type: Cable Series: SIRIUS
ABB Auxiliary Contact for Use with MO325, MS325, 72mm Length, 250Vdc, 400Vac
ABB ABB Auxiliary Contact for Use with MO325, MS325, 72mm Length, 250Vdc, 400Vac Part: 1SAM101904R0003

Auxiliary contact block for ABB motor starters and contactor.

For Use With: MO325, MS325 Voltage Range: 250Vdc, 400Vac Current Rating: 3 A
ABB Shunt trip for Use with MO132, MO165, MS116, MS132, MS165, 75.5mm Length, 350 → 415 V
ABB ABB Shunt trip for Use with MO132, MO165, MS116, MS132, MS165, 75.5mm Length, 350 → 415 V Part: 1SAM201910R1004 AA1-400

Shunt trip coil for ABB motor starters and circuit breakers.

Accessory Type: Shunt Trip For Use With: MO132, MO165, MS116, MS132, MS165 Voltage Range: 350 → 415 V
Igus Signal Cable for Use with Drive, 20m Length
Igus Igus Signal Cable for Use with Drive, 20m Length Part: 6FX8002-2DC10-1CA0 - MAT9070030 (20m)

Signal cable for industrial drive systems, 20 meters long for automation equipment.

For Use With: Drive Length: 20m
Eaton DX Series EMI Filter for Use with DA1, DG1, 220mm Length, 3-Phase
Eaton Eaton DX Series EMI Filter for Use with DA1, DG1, 220mm Length, 3-Phase Part: 174614 DX-EMC34-250-L

Three-phase EMI filter protects motors from electrical noise and interference.

Accessory Type: Filter For Use With: DA1, DG1 Electrical Phase: 3
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-U-86-S62-60G-177

Mounting kit for installing electromechanical drives in industrial automation systems.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-U-60-D40-40G-91-S1

Mounting kit for securing electromechanical drives in production equipment.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Schneider Electric Lexium Series Cable for Use with Stepper Drive SD326 and External Impulsion Generator, 1.5m Length,
Schneider Electric Schneider Electric Lexium Series Cable for Use with Stepper Drive SD326 and External Impulsion Generator, 1.5m Length, Part: VW3S8202R15

Connecting cable for stepper drive and external pulse generator, 1.5 meters.

Accessory Type: Connecting Cable For Use With: Stepper Drive SD326 and External Impulsion Generator Voltage Range: 24 V
Schneider Electric VW3 Series Encoder Cable for Use with Stepper Motor, 3m Length
Schneider Electric Schneider Electric VW3 Series Encoder Cable for Use with Stepper Motor, 3m Length Part: VW3S8101R30

Encoder cable connects stepper motors to control systems for position feedback.

Accessory Type: Encoder Cable For Use With: Stepper Motor Length: 3m
Schneider Electric VW3 Series Power Cable for Use with Servo Motor, 3m Length
Schneider Electric Schneider Electric VW3 Series Power Cable for Use with Servo Motor, 3m Length Part: VW3M5103R30

Power cable supplies voltage to servo motors, three meters long for installation.

Accessory Type: Power Cable For Use With: Servo Motor Length: 3m
Siemens 6SL3266 Series Cover
Siemens Siemens 6SL3266 Series Cover Part: 6SL3266-1PE00-0BA0

Protective cover for Siemens motor equipment and drive systems.

Accessory Type: Cover For Use With: Motor Series: 6SL3266
ABB Auxiliary Contact for Use with MO325, MS325, 72mm Length, 250Vdc, 400Vac
ABB ABB Auxiliary Contact for Use with MO325, MS325, 72mm Length, 250Vdc, 400Vac Part: 1SAM101901R0003

Auxiliary contact block for ABB motor starters, rated 250Vdc and 400Vac.

Accessory Type: Auxiliary Contact For Use With: MO325, MS325 Voltage Range: 250Vdc, 400Vac
ABB Terminal Block for Use with MO132, MO165, MS116, MS132, MS165, 26.5mm Length, 3-Phase, 250 V
ABB ABB Terminal Block for Use with MO132, MO165, MS116, MS132, MS165, 26.5mm Length, 3-Phase, 250 V Part: 1SAM201901R1002 HKF1-20

Three-phase terminal block for ABB motor starters and contactors.

Accessory Type: Auxiliary Contact For Use With: MO132, MO165, MS116, MS132, MS165 Voltage Range: 250 V
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-U-86-D60-60G-102-S1

Mounting kit for securing electromechanical drives in production equipment.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-U-86-D60-70A-102

Mounting kit for securing electromechanical drives in production equipment.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Festo EAMM Series Mounting Kit for Use with Electromechanical Drives
Festo Festo EAMM Series Mounting Kit for Use with Electromechanical Drives Part: EAMM-A-D32-57A-S1

Mounting kit for securing electromechanical drives in production equipment.

Accessory Type: Mounting Kit For Use With: Electromechanical Drives Series: EAMM
Lovato CX Series Communication Module
Lovato Lovato CX Series Communication Module Part: CX04

RS485 communication module enables motor device networking and data exchange.

Accessory Type: RS485 Communication Module Series: CX
Lovato VLB Series Profibus Module
Lovato Lovato VLB Series Profibus Module Part: VLBXL02

Profibus module for connecting motors to industrial control networks.

Accessory Type: Logic Module Series: VLB
Lovato VT Series Communication Module for Use with Motors, 141mm Length, 0.4 kw, 1-Phase, 200 → 240 V ac
Lovato Lovato VT Series Communication Module for Use with Motors, 141mm Length, 0.4 kw, 1-Phase, 200 → 240 V ac Part: VT104A240

Single-phase motor driver for 240V equipment with 0.4 kilowatt capacity.

Accessory Type: Driver For Use With: Motors Voltage Range: 200 → 240 V ac
Schneider Electric Altivar 212 Series Communication Card for Use with Altivar 212, 24 V dc
Schneider Electric Schneider Electric Altivar 212 Series Communication Card for Use with Altivar 212, 24 V dc Part: VW3A21212

Communication card enables data exchange for Altivar 212 motor drives.

Accessory Type: Communication Card For Use With: ALTIVAR 212 Voltage Range: 24 V dc

Buy Motor Accessories — Industrial Supply & Procurement

Browse 398 Motor Accessories products available for procurement through AgaCanGroup. Top brands include Schneider Electric, Festo, ABB, Lovato, Eaton. All products are available via RFQ — submit your specification and ACG will respond within 24 hours with pricing, availability and delivery options. ACG serves procurement teams across Africa, the Middle East and South Asia.

<
My RFQ Basket

Your RFQ basket is empty

Browse the catalogue and add items to your requirement list Browse catalogue
Compare

Add 2 or 3 products to compare

Compare now →