A rugged 2-position key switch with latching action that stays in place when turned, rated IP65 for dust and water protection, used to control machinery and equipment safely.
A small tilt switch that detects when equipment tilts 40 degrees from horizontal and sends an electrical signal to trigger an alarm or stop action.
A replacement colored cap for NKK JB Series tactile switches used in industrial control panels and keypads to provide visual indication and improved user feedback.
A horizontal-mounted tilt switch that detects when equipment tilts 15° and triggers an electrical alarm or shutdown at voltages up to 280V AC.
A key-operated electrical switch head used to control machinery and equipment in industrial settings, where you turn a key to select different operating modes.
A small horizontal tilt switch that triggers an alarm or control signal when equipment tilts 15 degrees from level, used in safety systems and machinery monitoring.
A small electrical switch mounted on circuit boards with 4 positions for configuring equipment settings.
A vertical tilt switch that detects when equipment tilts or changes angle, used to trigger alarms or stop machinery when something tips over.
A tilt sensor that triggers an electrical switch when mounted equipment tilts beyond 15 degrees, used to monitor angle in machinery and safety systems.
A sealed 10-position rotary switch for mounting on circuit boards or control panels that resists water and dust.
A compact electronic tilt switch that detects when equipment tilts beyond 25 degrees, commonly used to trigger alarms or stop machinery when it tilts dangerously.
A small tilt switch that detects when equipment tilts 15 degrees horizontally and automatically turns an electrical circuit on or off, commonly used in industrial machinery and control systems.
A 2-position key-operated electrical switch made by Legrand that turns equipment or circuits on and off, commonly used in control panels and machinery.
A small rotary selector switch that mounts on circuit boards and lets you set 16 different configuration options using hexadecimal codes.
A magnetic reed switch that opens and closes electrical circuits when triggered by a magnet, rated for up to 1.5 amps and 300 volts.
A small rotary switch that mounts on circuit boards to set 16 different configuration options using a turning dial.
A small rotary switch that mounts on circuit boards to set 10 different configurations or settings for industrial equipment, commonly used for device programming.
A sealed magnetic switch that detects proximity and activates circuits up to 1 amp at 230 volts, commonly used for automation and equipment control.
&sirasi=0)
A small magnetic switch that automatically opens or closes an electrical circuit when activated by a magnet, rated for up to 3 amps of electrical current.
A small electronic tilt switch that detects when equipment tilts 15 degrees from horizontal and triggers an electrical signal for alarms or shutdown systems.
A small magnetic switch that activates when exposed to a magnetic field, suitable for automation and control systems in industrial equipment.
A small horizontal tilt switch that detects when equipment tilts 15° and triggers an electrical signal, commonly used for safety shutdowns and position monitoring.
A small 6-position electrical switch that mounts on circuit boards to control or configure industrial equipment settings.
A rugged 16-position sealed switch for control panels and industrial equipment that resists water and dust.
A 16-position rotary switch that lets you configure settings on circuit boards and control equipment, made by Omron with durable gold contacts.
A key-operated switch head from Eaton used to control machinery and equipment on industrial sites by inserting and turning a key.
A small tilt switch that detects when equipment tilts 60 degrees from horizontal, used to trigger alarms or stop machinery on construction and industrial sites.
A key-operated switch head for controlling electrical equipment and machinery, installed in control panels and operator interfaces.
A mechanical key-operated switch head from Eaton used in control panels and machinery to enable or disable equipment with a removable key for safety.
A small rotary selector switch that mounts directly onto circuit boards and lets you set 16 different configuration positions for industrial equipment.
A small rotary switch that mounts directly on circuit boards and lets you select from 16 different settings using a hexadecimal code system.
ABB rocker switch cover that fits onto flush-mounted light switches for easy on-and-off control in homes and offices.
Black tactile switch cap designed to replace or upgrade switches on Controlmec control modules used in industrial equipment and machinery.
A 16-position rotary switch that mounts directly onto circuit boards for setting electrical configurations and control settings.
A small rotary switch mounted on circuit boards that lets you select from 10 different settings using a dial, commonly used in electronic devices and control equipment.
A small rotary switch with 10 positions that you mount directly onto circuit boards to configure equipment settings.
A waterproof 10-position rotary switch that you install on circuit boards to configure industrial equipment settings, rated for dusty and wet environments.
A clear plastic switch cap with yellow diffuser for NKK JB Series tactile switches, used in industrial control panels and keyboards to provide visual feedback and durability.
&sirasi=0)
A small sealed magnetic switch that turns on and off when exposed to a magnetic field, rated for 3 amps of electrical current and commonly used for door sensors and industrial automation.
A small magnetic switch that automatically turns electrical circuits on and off when a magnet is nearby, rated for up to 300mA at 110V.