Red nylon terminal post for low-voltage testing with 10 amp capacity.
Red nylon 5-amp terminal post with M6 thread for 30-volt test connections.
Red nylon terminal post for low-voltage circuits rated 5 amps.
Black nylon terminal post for low-voltage testing up to 10 amperes.
Threaded nylon float switch with 1 metre cable for tank level monitoring.
Black nylon terminal post with M6 thread for low voltage electrical testing.
Threaded nylon float switch for direct installation in tank openings and chambers.
White insulated terminal post for electrical test and measurement connections.
Nylon hose tail adaptor connecting 19mm hose to 3/4 inch BSP thread ports.
Black 5-amp 30V nylon terminal post for light testing.
Straight nylon hose tail adaptor with 3/8 inch BSP thread.
Nylon tube insert provides strong M8 threaded connection for structural frames.
Elbow hose connector adaptor with 1/4 inch BSP thread for 10mm hose.
Straight nylon hose connector with 3/8 inch BSP thread for 8mm hoses.
Nylon elbow hose tail adaptor quarter-inch BSP with eight-millimeter bore.
Nylon tube insert with brass bush for machinery levelling and vibration isolation.
Ten-millimeter nylon hose tail with BSP thread for light applications.
Nylon elbow hose tail adaptor with BSP thread for angled connections.
Straight nylon hose adaptor, 12mm diameter, BSP thread connection.
Nylon hose connector adaptor for 5mm tubes with quarter-inch BSP male thread.
Straight nylon hose adaptor, 12mm diameter, 1/2 inch BSP thread.
Elbow hose tail adaptor with 3/8 inch BSP thread for 10mm hose.
Nylon straight hose tail adaptor with eighth-inch BSP thread and six-millimeter bore.
Elbow hose connector with 8mm inner diameter and half-inch BSP thread for fluid lines.
Nylon elbow hose connector with 3/8in BSP male thread for 8mm hose lines.
Medium-duty M10 nylon tube insert with stainless bush for 1000kg load bearing applications.
Industrial nylon tube insert for high-load vibration isolation applications.
Square nylon tube insert with brass bushing for leveling and vibration isolation in machinery.
M20 nylon tube insert for machinery levelling and vibration dampening on industrial equipment.
Nylon elbow hose tail adaptor for 1/2 inch pipes with 12mm hose.
Nylon tube insert with brass bush for damping vibration in machinery, rated 1000kg load capacity.
Heavy-duty nylon tube insert for vibration damping and mechanical stress isolation.
Medium-duty M8 nylon tube insert with brass bush for 500kg load bearing in mechanical assemblies.
Straight nylon hose connector with 8mm ID for compressed air and fluid lines.
Nylon tube insert with stainless steel bush for vibration isolation and load support.
Nylon tube insert for M24 bolts, reduces vibration and noise in mechanical assemblies.
Heavy-duty threaded insert for machinery mounting and alignment.
Compact black terminal post for light-duty testing at 5 amperes.
Green 5-amp terminal post for 30-volt electrical test connections.
Nylon tube insert provides strong threaded connection in square tube structures.