Hirschmann fixed test probe with 1mm stainless tip for low-voltage circuit testing.
Test probe rated for 10 amperes with operating temperature range from -20 to +70 degrees.
One-millimeter fixed black test probe for low-voltage AC and DC testing.
RS PRO test probe rated 10A for electrical measurement and circuit diagnostics.
Test lead kit for automotive electrical system diagnosis and measurement.
10A test probe for circuit testing with wide operating temperature range of minus 20 to 70 degrees.
Ten-amp test probe for electrical circuits with wide temperature operating range.
Safety-rated fused test leads for multimeters with multiple connector types included.
Insulated test lead set CAT II with multiple connector types 1.2 meters 20A.
High-current 20A test probe rated CAT II 1000V for professional electrical work.
Test lead kit with multiple connector types, CAT III 600V rated.
Fluke insulation resistance tester for checking electrical cable and equipment safety up to 10000V.
Fine-tip needle test probe for low-voltage measurements up to 30V and 10 amps.
Heavy-duty AC/DC clamp meter measuring up to 3000A for industrial electrical testing.
Portable insulation resistance tester for checking electrical cable and equipment safety up to 5000V.
Portable insulation resistance tester for checking electrical cable and equipment safety.
Fused test probe set with 1.2m leads, CAT III 1000V rated.
Professional insulation resistance tester for high-voltage electrical safety testing up to 10,000V.
Portable insulation and continuity tester for electrical safety checks and fault detection.
Professional clamp meter measuring AC/DC current, voltage, and resistance for electrical installations and maintenance.
Vibration meter measuring equipment acceleration, velocity and displacement for maintenance.
AC clamp meter measuring 600A with continuity and diode testing for electrical maintenance.
Portable meter measures water conductivity up to 100 mS/cm for quality testing.
Hot wire probe measures air velocity and temperature for HVAC and ventilation system testing.
Portable insulation resistance tester for electrical safety testing and equipment verification.
Heavy-duty force gauge for lifting and load testing applications up to 25 tons capacity.
Testo vane probe measures air velocity, temperature and flow volume for HVAC and facility testing.
Digital clamp meter for 200 amp AC/DC current measurement in electrical installations.
Digital force gauge for measuring tension and compression loads in industrial applications.
Battery-powered humidity and temperature probe for HVAC and environmental monitoring.
Portable differential manometer for measuring pressure differences up to 200mbar with calibration.
Portable air quality monitor measuring temperature and velocity with data logging capability.
Portable tone generator for identifying and tracing network cables during installation and troubleshooting.
Compact digital manometer for measuring air pressure differences in HVAC and ventilation systems.
Heavy-duty clamp meter measuring up to 3000A DC and 2000A AC for industrial electrical work.
Portable digital force gauge for measuring loads up to 1 tonne with high accuracy.
Portable clamp meter for measuring electrical current, voltage and resistance in industrial installations.
Rotary vane probe accurately measures air velocity, temperature, and volumetric flow rates.
Compact AC clamp meter for measuring up to 200 amps in tight spaces safely.
Handheld electrical insulation and continuity tester for 50V to 1000V circuits and equipment.