A green LED pilot light that mounts flush into a 30mm hole on control panels to show when equipment is running or a circuit is live, powered by AC voltage.

An orange LED indicator light that mounts flush in a 30mm hole on control panels and machinery to show operational status or warnings, rated for 195-264V AC power.

Honeywell industrial toggle switch for on-off control in electrical panels.

Dual-pole monitoring relay for chassis mounting in control cabinets.

Surface-mounted six-pole isolator switch, 20A and 13kW rated, sealed IP65.

Screw-mounted relay for direct panel installation in industrial equipment.

Three-pole 63A surface-mounted isolator switch for industrial equipment control.

Two-contact front-mounted auxiliary block for industrial electrical control systems.

Surface-mounted three-phase isolator for flexible electrical installation positioning.

120V AC relay module for panel mounting in North American industrial systems.

Two-contact normally closed auxiliary block for side mounting on contactors.

A red LED indicator light that mounts on control panels to show when equipment is running or in alarm, rated for 230-240V AC power.

Panel mounted manual reset thermostat for industrial heating systems to 150 degrees.

Eaton two-contact side-mounted auxiliary switch for industrial control circuits.

Panel-mount three-phase isolator switch rated 32A, 15kW, IP65 protection.

A yellow LED indicator light that mounts on control panels to show machine status or alarms, rated for 230V power.

A red LED indicator light that mounts on control panels to show equipment status or alarm conditions, powered by 12V electricity.

Bushing-mounted toggle switch with screw connections for panels.

Side mounted auxiliary contact with mixed contact configuration for control.

A red LED indicator light that mounts flush on control panels to signal equipment status or alarms, with waterproof protection suitable for wet environments.

Siemens two-contact side-mounted auxiliary switch for automated control systems.

A white LED indicator light that mounts on control panels to show equipment status, rated for wet and dusty environments.

Flush-mounted 32A isolator switch with neutral pole for industrial electrical safety.

A clear indicator light that mounts on control panels to show when equipment is running or powered on, rated for 250 volts.

A white LED indicator light that mounts on control panel doors and cabinets to show equipment status or power on/off conditions.

A small green LED light that mounts on control panels to show when equipment is running or powered on, works on 24V power.

A red LED indicator light that mounts directly into control panel holes to show when equipment is running or in alarm.

A red LED indicator light that mounts on control panels to show when a machine or alarm is active, powered by standard 230V electricity.

A green LED indicator light that mounts on control panels to show when equipment is running, rated for wet environments and powered by 110V AC electricity.

A red LED indicator light that mounts on control panels to show machine status or alarm conditions, sealed against dust and light water spray.

A red LED indicator light that mounts on control panels to show equipment status, running at 24 volts.

A red LED indicator light that mounts on control panels to show equipment status, rated for wet environments and powered by standard 24V supply.

Surface-mounted six-pole 32A isolator switch for multi-circuit electrical systems.

A clear LED indicator light that mounts on control panels to show equipment status, rated for both indoor and wet environments.