3M rubber end cap heat shrink boot for large diameter cable sealing and protection.
Black plastic end cap for 40x40mm strut profiles.
Black plastic end cap for sealing and protecting 15mm cable ends.
Black plastic end cap for 30x30mm square strut profiles with 8mm slots.
Black end cap for ten millimetre cables, seals and protects wire terminals.
Black rubber end cap for sealing and protecting cable terminations.
42mm rubber end cap seals and protects the end of flexible conduit systems.
Black adhesive-lined polyolefin heat shrink end cap for sealing 20mm cable ends.
Black heat shrink end cap for sealing 12.7mm cables in electrical installations.
Black plastic end cap that closes 30x30mm channel openings for safety and finishing.
Round end cap to seal and protect 18mm diameter tubes and strut profiles.
Black plastic cap that seals the end of 30x60mm strut profiles for safety.
Black plastic end cap for 30mm strut profile with groove slot.
Black plastic end cap for 80mm wide strut profile tubes.
Black end cap for 40x40mm square strut profiles with 8mm groove.
Black end cap for 30x30mm strut profile with 6mm groove.
Metal end cap for 45mm strut profiles; zinc-plated steel construction.
Black plastic end cap for 8mm groove tubes, prevents debris and seals tube ends.
Black PVC end cap for sealing 41x41mm slotted industrial channels.
Black plastic end cap for sealing standard cable tray and channel systems.
Black end cap heat shrink boot for 20mm cables, temperature rated to 40°C.
Rubber end cap for 13mm electrical conduit, protects cable entries from dust and moisture.
Black adhesive-lined heat shrink boot for waterproof cable end protection.
Small black adhesive-lined end cap for sealing and protecting wire terminations.
Black end cap for 6.9mm structural profiles with 8mm groove.
Black end cap for 40x40R strut profile with 8mm groove.
Black rubber end cap for sealing 34mm conduit pipes and cable systems.
Black rubber end cap for sealing 16mm conduit pipes in protected electrical systems.
Black polypropylene end cap for 40x40mm strut profiles with groove.
Black plastic end cap for 40mm square strut profile with groove slot.
Black nylon round end cap for 28mm diameter tubes.
Black adhesive-lined polyolefin end cap for heat shrunk cable sealing.
Black adhesive-lined heat shrink end cap for 10mm cables, protects and seals cable ends.
Adhesive heat shrink end cap for sealing and terminating cable ends.