A key-operated switch head from Eaton that allows authorized personnel to control electrical equipment or machinery by inserting and turning a key.
A small 4-button membrane keypad with IP20 protection rating, used to control industrial equipment and machinery panels.
A 4-button membrane keypad used on industrial control panels and machinery to allow operators to input commands and navigate menus.
A two-position maintained key switch that mounts in a 22.5mm panel opening for controlling industrial machinery and equipment by turning a key.
A three-position manual selector switch with a 22mm panel cutout, commonly used in industrial control panels to let operators select between operating modes.
A key-operated switch head from Eaton that mounts on control panels to start, stop, or select equipment modes using a standard Ronis key.
A 22mm industrial selector switch with a black handle for choosing between two positions; commonly mounted on control panels to switch machinery or processes on and off.
A key-operated switch head for controlling machinery and equipment, mounted on control panels to allow authorized start/stop or mode selection.
A waterproof two-position paddle lever selector switch used on control panels and machinery to safely toggle between two operational states.
An Eaton key-operated switch head that lets operators start, stop, or select functions on industrial machinery and control panels using a Ronis key.
A three-position rotary selector switch with a black handle for industrial control panels, rated IP65 for dusty and wet environments.
A two-position key-operated selector switch that mounts in a 30mm panel opening to control machinery start/stop or mode selection in industrial equipment.
An Eaton key switch head for controlling machinery and equipment on factory floors and construction sites, operated by inserting a Ronis-type key.
A compact manual 2-position selector switch that mounts in a 22mm hole on control panels to select between two operating modes.
A small sealed push-button switch for electronics and control panels that works in dusty or wet environments and handles low-voltage signals.
A mechanical key-operated switch head from Eaton used in control panels and machinery to enable or disable equipment with a removable key for safety.
A rugged 3-position key-operated switch for controlling machinery and equipment in industrial plants and control panels.
A 22mm three-position selector switch for industrial control panels that lets operators choose between three operating modes.
A heavy-duty 3-position selector switch with sealed design used to control industrial machines and equipment from a central control panel.
A black knob selector switch for industrial control panels that lets operators choose between two settings, installed in a standard 22mm hole.
A 22mm key-operated selector switch with three positions that automatically returns to centre when released, used to control machinery and equipment in industrial settings.
A 22mm two-position selector switch that stays in the chosen position until manually moved again, used on control panels and machinery to select between two operating modes.
A six-button membrane keypad with a 2-by-3 layout used for control input on industrial equipment and control panels.
A rugged 3-position selector switch with dual contacts for controlling industrial machinery, rated IP65 for wet or dusty environments.
A three-position selector switch with a black handle that mounts in a 22.5mm panel cutout, used to control equipment in industrial and electrical installations.
A 22mm manual selector switch with 2 positions, used to control equipment on/off or select between two operating modes on industrial control panels.
A two-position selector switch head with a black handle for controlling machinery and equipment from a control panel, commonly used to select between different operating modes.
A rugged black key-operated electrical switch with two positions for momentary operation, commonly used in industrial control panels and machinery to enable or disable equipment functions.
A durable industrial key switch with two positions that locks in place, used to control equipment startup and operation on factory and plant panels.
A heavy-duty 3-position key switch for industrial control panels that stays in the position you set it until you manually change it.
A 2-position manual selector switch with 22mm panel cutout for controlling industrial equipment and machinery on/off or mode selection.
A rugged 22mm electrical selector switch that springs back to centre position, commonly used on machinery and control panels to select between two functions.
An Omron industrial selector switch with two separate contact configurations, used to manually control equipment or machinery in wet or dusty environments.
A non-illuminated key switch head from Eaton's Moeller series used to control machinery and equipment with a physical key for secure operation.
A rugged 3-position selector switch with a short handle, designed for industrial equipment control panels and outdoor installations where weather protection is needed.
A rugged two-position manual selector switch for industrial control panels that stays in the selected position without holding the lever.
A manual selector switch with a 22mm mounting hole for controlling electrical circuits on control panels and machinery.
A key-operated selector switch with 2 positions for controlling electrical circuits on machinery and equipment, commonly found on industrial panels and control systems.
A key-operated switch head from Eaton that lets you control electrical equipment and machinery by turning a key, commonly used in control panels and equipment access.
A key-operated switch head for controlling industrial machinery and equipment, mounted on control panels to allow authorized personnel to start or stop operations.