A heavy-duty key-operated switch for industrial control panels that activates equipment when turned, available in three positions and rated for harsh indoor and outdoor environments.
A key-operated electrical switch head from Eaton that lets you control machinery or equipment by turning a key, commonly used on industrial panels and control boxes.
A heavy-duty industrial key switch with three positions and momentary action, designed for machinery control panels and emergency stop applications in harsh environments.
A rugged 3-position key switch head for industrial control panels that operates with a flat key and returns to neutral when released.
A two-position key switch head that stays in the position you turn it to, used on control panels to enable or disable equipment with a key.
A rugged 2-position key-operated switch head for industrial control panels that returns to neutral when released, rated for wet and dusty environments.
A 3-position latching key switch with 22mm diameter that fits into control panel cutouts for machines and equipment; used to turn operations on, off, or into a special mode with a physical key for safety.
A heavy-duty 2-position key-operated selector switch for industrial control panels that stays in position when switched and works in harsh wet or dusty environments.
A 30mm two-position key-operated switch for industrial control panels that stays in the selected position until manually switched back.
A two-position industrial key switch with a 22.5mm panel opening that stays in the position you turn it to, used to control equipment on construction sites, factories, and utility installations.
ABB stainless steel key actuator for Mkey safety switch models.
A 2-position key switch with a maintained action that stays in the selected position until manually moved, used to control machines and equipment on industrial panels.
A three-position key-operated selector switch for industrial control panels that holds its position until manually switched again.
A rugged 2-position latching key switch for industrial control panels and machinery, allowing operators to select between two states and lock the position until the key is turned again.
A three-position key-operated selector switch with a 30mm panel cutout, used to control equipment start/stop and mode selection on industrial machines and control panels.
A 2-position key switch head with momentary action that fits a 22.5mm panel opening, used for controlling machines and equipment access in industrial settings.
A durable 2-position key-operated selector switch for industrial control panels that can withstand harsh wet and dusty environments.
A durable industrial key-operated switch for controlling machinery and equipment, installed in a 16mm panel cutout with protection against dust and water spray.
A heavy-duty 2-position key-operated selector switch for industrial machinery and control panels, switched on and off with a standard key.
A two-position industrial key-operated selector switch with spring return action, mounted through a 22.5mm hole in control panels to enable or disable equipment.
A three-position key-operated selector switch head from Legrand used in industrial control panels to safely enable or disable machinery or systems with a flat key.
A Siemens industrial key switch with 2 positions for controlling equipment manually, rated for wet and dusty environments with IP66/IP67/IP69K protection.
A heavy-duty 3-position key-operated selector switch with spring-return action for controlling industrial machines and electrical systems, suitable for outdoor and wet environments.
A key-operated electrical switch head from Eaton that controls machinery and equipment access by turning a Ronis key.
A mechanical key-operated switch head from Eaton used to control industrial equipment and machinery by turning a key, commonly found in control panels and equipment enclosures.
Safety interlock actuating key for PG 13.5 cable glands in industrial machinery.
A 22mm key-operated switch with two positions that locks in place when turned, used to control machinery and equipment safely with a key.
Stainless steel safety interlock with key actuator for secure machine protection.
A rugged two-position key switch for industrial control panels that stays in the position you set it until you turn the key again.
A rugged key-operated switch head for industrial control panels that lets you manually start, stop, or select equipment using a Ronis key.
Triangular replacement key for Schmersal and compatible safety lock systems.
A three-position latching key switch with a 22.5mm cutout, used in industrial control panels to select between different operational modes with key security.
A pushbutton actuator head that fits EAO Series 51 switches, used to replace worn or damaged button tops on industrial control panels.
A key-operated switch head for controlling industrial machinery and equipment, mounted on control panels to allow authorized personnel to start or stop operations.
A two-position key switch for controlling electrical equipment on industrial control panels, operated with a round key and stays in the selected position until manually changed.
A heavy-duty 3-position key-operated electrical switch for industrial control panels, allowing secure on/off/standby selection with key-based access control.
A durable 3-position key switch for industrial control panels that uses a key to select between different functions, sealed against water and dust.
A rugged 2-position key switch for industrial control panels that stays in the selected position when you turn the key and release it.
A heavy-duty key-operated two-position switch for industrial control panels that latches in place and works in wet, dusty, and high-pressure wash environments.
A heavy-duty 3-position key switch with momentary action for industrial control panels and machinery, rated for harsh and wet environments.