A rugged 2-position key switch with latching action that stays in place when turned, rated IP65 for dust and water protection, used to control machinery and equipment safely.
A three-position key-operated selector switch head from Legrand used in industrial control panels to safely enable or disable machinery or systems with a flat key.
A key-operated electrical switch head used to control machinery and equipment in industrial settings, where you turn a key to select different operating modes.
A key-operated switch head for controlling electrical equipment and machinery, installed in control panels and operator interfaces.
A key-operated switch head from Eaton used to control machinery and equipment on industrial sites by inserting and turning a key.
A 2-position key-operated electrical switch made by Legrand that turns equipment or circuits on and off, commonly used in control panels and machinery.
A mechanical key-operated switch head from Eaton used in control panels and machinery to enable or disable equipment with a removable key for safety.
A 2-position key switch with a maintained action that stays in the selected position until manually moved, used to control machines and equipment on industrial panels.
A key-operated switch head from Eaton that uses a Ronis key to control electrical circuits in industrial equipment and control panels.
A three-position key-operated selector switch for industrial control panels that holds its position until manually switched again.
A key-operated electrical switch head from Eaton for controlling equipment access and operation on industrial control panels and machinery.
A key-operated selector switch with 3 positions and 2 normally-open contacts for controlling industrial equipment, mounted in a 22.5mm panel cutout.
A mechanical key switch head from Eaton that controls electrical circuits on machinery and control panels, operated by inserting and turning a key.
A sturdy 2-position key switch head for controlling machinery and equipment, rated for temperatures from -20°C to +55°C.
A non-illuminated key switch head from Eaton that allows operators to lock and unlock equipment or control circuits using a key, commonly used on machinery and control panels.
An illuminated 2-position key switch for controlling equipment on/off or selecting between two operating modes on control panels.
A rugged key-operated switch head for industrial control panels that lets you manually start, stop, or select equipment using a Ronis key.
A durable 2-position key switch that locks in place when turned, commonly used to control equipment start/stop or mode selection on machinery and control panels.
A robust 16mm key-operated selector switch that locks in place when turned, commonly used to control machinery and equipment on industrial sites and utility installations.
A 2-position key-operated selector switch with a 22mm panel cutout, commonly used in machinery control panels and equipment to select between operational modes.
A two-position industrial key-operated selector switch with spring return action, mounted through a 22.5mm hole in control panels to enable or disable equipment.
A heavy-duty 2-position key switch for industrial control panels that turns equipment on and off with a key, rated for wet and dusty environments.
A heavy-duty 2-position key-operated selector switch for industrial control panels that stays in position when switched and works in harsh wet or dusty environments.
A key-operated electrical switch head from Eaton that controls machinery and equipment access by turning a Ronis key.
A 2-position key switch head with momentary action that fits a 22.5mm panel opening, used for controlling machines and equipment access in industrial settings.
A non-illuminated key switch head from Eaton's Moeller series used to control machinery and equipment manually with a key insert.
A key-operated switch head from Eaton used to control electrical circuits in industrial equipment and machinery, operated with a Ronis-type key.
A mechanical key-operated switch head from Eaton used to control industrial equipment and machinery by turning a key, commonly found in control panels and equipment enclosures.
A rugged 2-position latching key switch for industrial control panels and machinery, allowing operators to select between two states and lock the position until the key is turned again.
A key-operated switch head from Eaton that uses Ronis keys to control industrial machinery and equipment on factory floors and construction sites.
A two-position key-operated latching switch for industrial control panels that allows secure manual selection between two operating states and can be locked in any position.
A key-operated electrical switch head from Eaton that lets you control machinery or equipment by turning a key, commonly used on industrial panels and control boxes.
A heavy-duty industrial key switch with three selectable positions and latching action, designed for harsh outdoor and wet environments on machinery and control panels.
A durable industrial key-operated switch for controlling machinery and equipment, installed in a 16mm panel cutout with protection against dust and water spray.
A rugged industrial key switch that securely locks equipment on or off with two positions, mounted in a 16mm panel opening.
A three-position key-operated selector switch with a 30mm panel cutout, used to control equipment start/stop and mode selection on industrial machines and control panels.
A two-position maintained key switch that mounts in a 22.5mm panel opening for controlling industrial machinery and equipment by turning a key.
A heavy-duty 2-position key-operated selector switch for industrial machinery and control panels, switched on and off with a standard key.
A 30mm two-position key-operated switch for industrial control panels that stays in the selected position until manually switched back.
A 3-position key-operated selector switch for industrial control panels that lets operators select between different modes or functions with a key.