Portable LED component tester for identifying and verifying electronic components.
Industrial galvanic isolator for 4-20mA current signal isolation and transmission.
ABB isolator circuit breaker for controlling and disconnecting electrical loads safely.
USB isolator protecting equipment from electrical surges and interference damage.
Isolates RS-232 serial signals for safe communication between industrial equipment.
A 250V three-pole switch for controlling and safely isolating fans in indoor electrical installations.
Interface isolator for protecting and conditioning industrial signal lines safely.
Single-channel isolator converts current signals safely for industrial automation and control systems.
Handheld battery-powered component tester for diagnosing transistors and diodes.
A hex nut accessory that secures Nidec miniature pushbutton switches (SPP and S2P models) to panel or enclosure mounting surfaces.
A 10-position rotary switch that mounts flat on circuit boards for selecting different electrical settings or modes in industrial equipment.
A 10-position rotary selector switch that tells equipment which mode or setting to use, mounted directly into circuit boards.
RF isolation shield for reducing antenna interference in wireless systems.
Bas Components System Zero bit for specialized fastening.
A small rotary switch component that lets you set 16 different configuration codes on control boards and industrial equipment.
AC isolator circuit trip for solar panel systems at 100 amperes.
A metal mounting frame that holds Nidec DP4 and DPL4 push button switches in place on control panels and machinery.
Single-channel galvanic isolation amplifier for NAMUR sensor signal protection.
High-speed opto-isolator for protecting RS232 serial connections from electrical noise.
Medical ethernet isolator RJ45 protecting patient care networks in hospital environments.
ATEX isolated driver controls current outputs safely in hazardous areas.
ATEX RTD isolator safely converts temperature resistance signals for hazardous areas.
Three-phase isolator switch rated 80A for safe electrical circuit disconnection and maintenance.
Four-pole isolator switch rated for 80 amps, disconnects electrical circuits safely during maintenance.
Single-channel galvanic isolator for industrial signal conditioning and noise reduction in control systems.
Rocker switch from industrial-grade 8 switch product series.
Steel hydraulic isolation valve for pressure gauges in industrial systems.
A small rotary selector switch with 16 positions used to configure settings in industrial control panels and electronic equipment.
Ball valve for isolating and controlling water or fluid flow in pipelines.
Two-channel galvanic isolation amplifier protecting NAMUR sensor signals.
A small rotating switch with 16 positions that lets you set codes on industrial equipment panels or control boxes.
A small rotary coded switch that mounts directly on circuit boards and lets you set different electrical configurations by turning the dial to 16 different positions.
A small rotary switch that mounts directly on circuit boards and lets you select from 16 different settings for industrial equipment configuration.
A small rotary switch that lets you set different electronic equipment configurations by rotating and selecting one of four positions.
A small rotary switch with 16 positions used to configure settings in industrial control equipment and devices.
A compact rotary switch that mounts flat on circuit boards and lets you select between 10 different settings using binary code signals.
Push button cap for Nidec SPC103 push button switches.
Replacement lever actuator for Nidec 8H Series rocker switches.
A small electrical switch with two positions that mounts directly on circuit boards, commonly used to configure settings in industrial equipment and control systems.
A 16-position rotary switch with a knob that you turn to select settings, commonly used in control panels and equipment configuration.