Brass compression equal tee for 4mm pipes with three female ports.
Brass branch tee fitting connecting quarter-inch pipes and threads.
Brass compression tee splits 8mm pipes into three equal branches.
Brass compression tee fitting for joining three 15mm pipes in plumbing systems.
Brass tee connector for 15mm pipes, quick push-fit installation without tools.
Brass equal tee splitter for three-eighth-inch female-threaded pipes.
Brass equal tee splitter for three-quarter-inch female-threaded pipes.
Brass tee connector for joining three pipes in plumbing and pneumatic systems.
Stainless steel equal tee for joining three same-sized pipes at right angles.
Brass tee fitting with three 1-inch BSPP female connections for pipe splitting.
Black plastic 45 degree reducing tee junction for large drainage pipes.
Brass tee fitting for joining three 6mm pipes with compression connections.
Brass compression tee for three-way connections in ten-millimetre pipe distribution systems.
High-carbon flat nose pliers for precise bending and shaping work.
Small PVC reducer tee for connecting secondary drain branches.
Grey PVC 45-degree tee for drainage branching, 160x110mm.
Grey PVC 45-degree tee for drainage branching, 160x125mm.
Large PVC tee fitting for connecting sewer pipes in drainage systems.
PVC sewer tee fitting for connecting drainage pipes at junction points.
PVC angled tee junction for splitting or combining drainage pipe flows.
Green PPR large reducing tee connecting 160mm and 125mm pipes at 90 degrees.
PVC sewer tee reducer fitting for joining drain pipes at angles.
PVC equal tee for 50mm pipes used in water distribution and plumbing networks.
Black plastic reducing tee for connecting 110mm and 75mm sewer pipes.
Galvanised iron reducing tee for 1-inch pipes, water and gas distribution.
Black plastic 45 degree tee junction for 40 mm drainage pipes.
Grey PVC 45-degree tee reducer for drainage, 50x40mm sizes.
Grey PVC tee reducer fitting for outdoor sewer and drainage pipework connections.
Flat nose pliers for gripping, bending, and holding flat surfaces.
Galvanised iron tee connector for joining pipes in water and gas systems.
Copper three-way connector for 22mm and 15mm pipes in modern plumbing.
Reducing PVC sewer tee for connecting different sized pipes at 45-degree angles.
Grey PVC equal tee for branching sewer pipes at same diameter junction points.
Grey PVC sewer tee reducer for connecting pipes of different sizes with push-fit joints.
Grey PVC drainage tee connector for indoor waste pipe systems.
Large angled reducer tee for stepped sewer pipe connections.
Green PPR reducing tee for 40mm to 25mm branch connections at 90 degrees.
PVC tee-shaped fitting for splitting water flow into three equal directions.
Push-fit tee connector for splitting water pipes in three directions equally.
Angled PVC reducer tee for branching smaller drain lines.