Blue metal-detectable polyethylene wrap for cables, detectable in food and pharmaceutical facilities.

Metal-detectable polyethylene spiral wrap for large cable bundles and food safety.

Blue metal detectable polyethylene spiral wrap for large cables, 30 metre roll rated minus 60 to 80.

A compact magnetic proximity switch that detects nearby objects and sends an electrical signal, commonly used to monitor equipment position and movement in industrial machinery.

An Omron plunger limit switch that detects when machinery or equipment reaches a specific position and sends an electrical signal to control or stop the machine.

A lever-operated limit switch that detects when machinery or equipment reaches a specific position, commonly used in industrial automation to stop or control movement.

A robust industrial limit switch with coil spring actuation that detects equipment position and controls electrical circuits in wet or dusty environments.

PCB-mounted roller lever switch for medium-current detection and control systems.

Horizontal float switch for water level detection in tanks and reservoirs.

A lever-operated limit switch that detects machine position and stops or starts equipment when a moving part reaches a set point.

A waterproof limit switch with a rod actuator used to detect position and trigger equipment start/stop in industrial machinery and automation systems.

A small tilt and position sensor that detects when equipment tilts between 25 and 60 degrees, commonly used to trigger alarms or stop machinery if something tips over.

A rugged industrial limit switch with a roller lever that detects when machinery or moving parts reach a specific position, used to stop, start, or redirect equipment safely.

A sealed magnetic switch that detects the presence of a magnet and turns an electrical circuit on, rated for 120V AC power and used in machines and automated systems to sense position or movement.

An Omron industrial limit switch with a roller lever that detects machine position and triggers electrical circuits up to 500V AC and 15A, commonly used to stop or reverse machinery at specific points.

Magnetic sensor detects cylinder position in pneumatic systems with LED feedback indicator.

Magnetic sensor detects pneumatic cylinder position in industrial machinery and automation systems.

Magnetic sensor detects pneumatic cylinder position with LED status light for factory automation.

A mechanical limit switch with a roller plunger that detects position or end-of-travel and triggers electrical circuits in industrial machinery.

An Omron plunger limit switch that detects when moving parts reach a position and triggers an electrical signal to control machinery.

An Omron industrial limit switch with a roller lever that detects the position of moving machinery parts, rated for up to 500V AC and 15A.

An Omron industrial limit switch that detects when a moving part reaches a specific position and triggers an electrical signal to control machinery or alarms.

A roller limit switch that detects when machinery or conveyor parts reach a specific position and triggers an electrical signal to stop or control the motion.

A mechanical limit switch with a plunger that detects when machinery or equipment reaches a specific position, commonly used to stop or control equipment movement.

A mechanical limit switch with a roller lever that detects position or movement by snapping open or closed, used to control machinery and automate industrial equipment.

A small tilt switch that detects when equipment tilts between 25 and 60 degrees and sends a low-voltage signal to trigger an alarm or control system.

A rugged metal limit switch with a roller lever that detects when machinery or equipment reaches a specific position, suitable for dusty and wet industrial environments.

An Omron limit switch with a roller lever that detects when machinery or equipment reaches a specific position, used to stop or control motion in industrial machines.

A small rectangular magnetic proximity switch that detects object position and triggers an electrical contact, used in machinery and conveyor systems to sense movement and location.

An industrial limit switch with a lever that detects when machinery or equipment reaches a certain position, commonly used to stop or control motion on production lines and heavy equipment.

A heavy-duty roller limit switch that detects machine position and triggers electrical circuits when equipment reaches end-of-travel, commonly used on industrial doors, gates, and automated machinery.

A durable industrial limit switch with plunger activation that detects when machinery reaches a specific position, rated for wet and dusty environments.

A weatherproof magnetic proximity switch that detects metal objects without touching them, used in automation and machinery to sense position and movement.

An Omron lever-operated limit switch that detects when machinery or equipment reaches a specific position, triggering an electrical signal to control operations.

A rugged industrial limit switch with a roller lever that detects position and triggers electrical contacts, sealed against dust and water for factory and outdoor use.

A waterproof cylindrical magnetic switch that detects the presence of a magnet and sends an electrical signal, commonly used to monitor door and machinery position in industrial equipment.

Magnetic position sensor for pneumatic cylinders with visual indication.

A sealed magnetic switch that detects when a magnet comes near it and triggers an electrical signal; used in doors, gates, and machinery position detection.

Magnetic sensor detects pneumatic cylinder position with LED indicator.

Magnetic sensor detects pneumatic cylinder position in industrial automation systems.