A blue LED indicator light that mounts flush into a 30mm hole on control panels and machinery to show operational status, powered by standard AC mains voltage.
A green LED pilot light for industrial control panels that mounts flush into a 30mm hole and lights up when powered between 195V and 264V AC, commonly used to show equipment status.
A green LED indicator light that mounts on control panels to show equipment status, rated for wet and dusty environments.
A red LED indicator light that mounts on control panels to show when equipment is running or in alarm, rated for 230-240V AC power.
A white LED indicator light that mounts on control panels to show equipment status, powered by 110V electricity.
A red LED indicator light that mounts on control panels to show operational status, rated for indoor and outdoor use.
A blue LED pilot light that mounts on industrial control panels to show when equipment is running or a process is active, rated for wet and dusty environments.
A 3-position selector switch by Siemens for controlling industrial machinery and equipment with two normally open contacts and a 10 amp rating.
A green LED indicator light that mounts on control panels to show equipment status or operational state, rated for wet and dusty industrial environments.
A white LED indicator light that mounts flush into a 30mm hole to show status or signal on industrial control panels and machinery.
A white LED indicator light that mounts on control panel doors to show equipment status, rated for dusty and wet industrial environments.
A green LED indicator light that mounts on control panels to show equipment status or alarm conditions, powered by 24 volts.
An orange LED indicator light for mounting on control panels that shows equipment status or alarms to operators.
A red LED warning light with buzzer that mounts on control panels to alert operators of equipment status or alarms, powered by 24V.
A green LED indicator light that mounts directly into a 22mm hole on control panels to show equipment status or operational state.
A waterproof 3-position selector switch with short handle for controlling equipment in wet or dusty industrial environments, rated for 250V and up to 1A current.
A two-position illuminated selector switch for manual machine control, commonly used to start, stop, or select between two operating modes on industrial equipment.
A yellow LED indicator light that mounts on control panels to show machine status or alert operators, powered by standard AC voltage.
A green LED indicator light that mounts on control panels to show equipment status or operating mode, rated for wet and dusty environments.
A clear LED indicator light that mounts on control panel cutouts to show equipment status or operational state, powered by 230V AC.
A panel-mounted emergency stop button with maintained action that cuts power to machinery when pressed, rated IP65 for dusty or wet environments.
A green LED indicator light that mounts on control panels to show machine or equipment status, rated for wet environments.
A blue LED indicator light that mounts on control panel cutouts to show when equipment is running or in a specific state.
A yellow LED indicator light with buzzer alarm for mounting on control panels, rated for wet and dusty industrial environments.
A white LED indicator light that mounts on control panels to show equipment status or operation, rated for 230V AC power.
An orange LED indicator light that mounts on control panel cutouts to show equipment status or operational states, rated for wet and dusty environments.
A clear LED pilot light that mounts on industrial control panels to show equipment status, powered by 120V AC mains.
A clear LED pilot light that mounts on control panels to show equipment status and operational state, rated for voltages from 5V to 500V AC or DC.
A clear LED indicator light that mounts flush on control panels to show equipment status, rated for wet and dusty industrial environments.
A small yellow LED warning light that mounts into a 22mm hole on an electrical panel to show operational status or alerts.
An orange LED indicator light that mounts on control panels to show machine or equipment status, rated for wet and dusty environments.
A yellow LED indicator light that mounts on control panel doors to show equipment status or alarm conditions, operating on 24V power.
A green LED indicator light that mounts on control panels to show equipment status or operating conditions, rated for 230V AC power.
A rugged red emergency stop button that mounts on control panels to safely shut down machinery; widely used in factories and construction sites.