An illuminated 3-position industrial selector switch with 30mm panel cutout, used for manual equipment control and mode selection in industrial panels and control cabinets.
A 2-position illuminated selector switch with a 30mm panel cutout that safely controls electrical circuits up to 600V, commonly used on industrial control panels.
A 22mm key-operated switch with two positions and spring return, used in control panels to enable or disable equipment with a key.
An illuminated three-position selector switch for machine control panels that lets operators choose between different operating modes on industrial equipment.
A three-position illuminated selector switch for industrial control panels that lets operators choose between different machine modes or functions.
A three-position selector switch with spring return to center, rated for 600V and 6A, used to select between different electrical circuits or machine functions on control panels.
An illuminated two-position selector switch for industrial control panels that lets operators choose between two circuits or functions with a glowing indicator.
A two-position illuminated selector switch for industrial control panels that lets operators toggle between two functions, rated for up to 600V.
An illuminated two-position selector switch for industrial control panels that lets operators choose between two different functions or states.
A three-position illuminated selector switch for industrial control panels that allows operators to choose between different operating modes with visual feedback.
A two-position selector switch by Schneider Electric that mounts in a 30mm panel cutout and controls electrical circuits up to 600V at 6A, commonly used to select between operating modes on industrial equipment.
An illuminated two-position selector switch with a 30mm panel cutout for industrial control panels, rated up to 600V and 6A.
A blue LED pilot light that mounts flush into a 30mm hole to show status on control panels, running on 24V power.
A spring-loaded selector switch that snaps back to center position, used to control electrical circuits in industrial machinery and equipment panels.
A 3-position industrial selector switch that allows manual selection between different operating modes or circuits, commonly used on control panels and machinery.
A Schneider Electric 2-position selector switch with a 30mm mounting hole, used to manually control electrical circuits in industrial equipment and machinery by rotating between two fixed positions.
A rugged three-position selector switch with two normally-open contacts, used to control electrical circuits in industrial and construction environments where operators need to manually select between different operating modes.
A Schneider Electric selector switch with three positions and spring-return action that springs back to center when released, rated for up to 600V AC/DC, used to control electrical circuits in industrial equipment and machinery.
A red emergency stop push button that mounts on control panels to immediately halt machinery or equipment when pulled, with weatherproof IP65 protection.
A white LED pilot light that mounts flush into control panels and equipment to show operational status, rated for very wet and dusty environments.
A green LED indicator light that mounts flush into a 30mm hole on control panels to show status or system operation in industrial machinery and electrical cabinets.
A three-position industrial selector switch with double-pole contacts, rated for up to 600V AC/DC, commonly used in control panels and machinery to switch between operational modes.
A two-position illuminated selector switch with a 30mm cutout for mounting in control panels, rated for up to 6 amps and 600 volts, commonly used to start/stop machinery or select between two operational modes.
A white LED indicator light that mounts flush into a 30mm hole on control panels and machinery, powered by standard AC voltage, to show equipment status.
An orange LED pilot light that mounts flush into a 30mm hole on control panels to indicate power or status in industrial equipment.
A three-position illuminated selector switch with a 30mm panel cutout diameter for choosing between operational modes in industrial control panels and machinery.
An illuminated two-position selector switch with a 30mm mounting hole, used to manually select between two electrical circuits or equipment states on control panels.
A red LED indicator light that mounts flush into a 30mm hole on control panels and machinery to show operational status or alerts, powered by standard AC mains voltage.
A white LED indicator light that mounts flush into a 30mm hole on control panels and machinery to show when equipment is running or powered on, rated for 100-132V AC.
A white indicator light that mounts in a 22mm hole to show machine status or operating conditions; rated for 240V power.
An orange indicator light that mounts flush into a 22mm hole and shows when equipment is powered on, rated for wet and dusty industrial environments.
A white LED pilot light that mounts flush into a 30mm hole and indicates machine or equipment status using DC or AC power.
A two-position manual selector switch with 30mm mounting diameter for controlling electrical circuits in industrial equipment and control panels.
A white LED indicator light that mounts on control panels to show when equipment is running or powered, rated for 400V industrial systems.