PVC straight reducer bush fitting connects different diameter pipes in water systems.

PVC elbow fitting for 4-inch pipes, changes water or liquid flow direction at 90 degrees.

PVC reducer bush fitting for large-diameter water distribution pipe connections.

PVC tee-shaped fitting for splitting water flow into three equal directions.

PVC tee fitting for 32mm pipes to split flow in three directions.

PVC equal tee fitting for joining three 40mm pipes at right angles.

PVC equal tee fitting for joining three 20mm pipes at right angles.

PVC elbow fitting for 32mm pipes, changes water or fluid flow direction 90 degrees.

PVC elbow pipe fitting for redirecting water flow in plumbing systems.

PVC equal tee fitting for joining three pipe sections at right angles.

PVC straight tank adapter fitting for connecting 1.5 inch water or irrigation pipelines.

PVC tee fitting for joining three pipe sections at right angles in plumbing systems.

PVC reducer bush stepping down from 32mm to 20mm pipes.

PVC socket for joining two pipes of equal size in straight configuration.

PVC reducer bush for connecting slightly different sized water pipes together.

PVC reducer joining different-sized pipes for transition in water networks.

45-degree angled PVC elbow for gradual bends in larger water pipes.

45-degree angled PVC elbow for gentle direction changes in water systems.

PVC tank adapter with 1 inch BSP thread for water tank installation and connection.

PVC tank adapter for 25mm pipes, cemented connection for water storage.

Right-angle PVC elbow for sharp turns in pipe installations and plumbing.

Reducer bush steps down from 1 inch to 1/2 inch pipe diameter.

PVC reducer bush that connects 25mm down to 20mm pipes in plumbing systems.

PVC adapter socket for 20mm pipes with half-inch threaded connection.

90-degree PVC elbow for 1.25-inch pipes, changes pipe direction.

PVC forty-five degree elbow for half-inch pipe direction changes.

PVC equal socket joining two same-size pipes in water distribution networks.

PVC reducer bush for connecting 2.5 inch and 2 inch pipes straight.

PVC pipe tee connector for splitting water lines in three directions at 90 degrees.

90-degree elbow bends 1 inch uPVC pipes for water routing.

90-degree PVC elbow for 2-inch pipes, bends large water lines.

PVC 45-degree elbow for 20mm pipes using cement connection.

PVC equal tee for 50mm pipes used in water distribution and plumbing networks.

PVC equal socket joins same-size 3/4-inch pipes together.