A rotary switch with 10 positions that lets operators manually configure or adjust settings on equipment and circuit boards.

Basic lever micro switch with screw terminals for general equipment control applications.

A rotary switch with 16 settings for configuring industrial electronics and machinery on circuit boards.

A small 10-position slide switch that plugs directly into circuit boards to configure industrial equipment settings.

Simple USB temperature data logger with battery power for short-term monitoring.

Handheld multimeter for voltage, resistance and continuity testing.

Low-power DIP switch with lever actuator for equipment configuration.

Simple ON delay timer relay with 0.2 to 5 minute range for factory automation.

Digital panel-mount timer with programmable hours, minutes and seconds capability.

Industrial timer relay for DIN rail controlling equipment on or off at set intervals.

Analogue handheld multimeter with mechanical needle display for basic electrical measurements.

Bourdon pressure switch for air, oil, and water systems with adjustable settings.

Panel-mounted timer with digital settings for hours, minutes and seconds timing.

Valsteam ADCA solenoid valve for pneumatic system control and automation in industrial settings.

Fused electrical test lead set rated for 1000V industrial use with safety certification.

Omron timer relay for controlling electrical circuits with 2-60 second delay settings.

A 10-position rotary switch that connects to circuit boards to configure settings on industrial equipment.

Compact four-digit LCD counter for moderate-speed impulse counting in factory automation settings.

Portable current clamp adapter for measuring AC and DC electrical current up to 450mA in industrial settings.

Industrial timer relay for automated control circuits, 0.1 second to 10 minute delay settings.

A 16-position rotary switch that plugs into circuit boards to set configurations for industrial equipment and control systems.

Industrial timer relay for automated equipment control with 0.1 minute to 100 hour delay settings.

Panel-mounted timer relay for industrial control systems with 0.1 minute to 10 hour delay settings.

A three-direction joystick button with potentiometric sensing used in industrial machinery and control panels to precisely direct movement or adjust settings.

A rugged industrial limit switch with a roller plunger that detects when moving machinery reaches a set position, then triggers an electrical signal to stop or control the motion.

A sealed industrial limit switch with a roller lever that detects when machinery or moving parts reach a set position, commonly used on factory equipment and conveyors.

A rugged waterproof switch that detects when machinery or equipment reaches a set position, commonly used to stop or control equipment on factory floors and construction sites.