Straight elastomer heat shrink boot with adhesive for large cable joint protection.
Shielded low voltage signal cable for audio equipment, three hundred metres red.
Shielded low voltage signal cable for audio equipment, three hundred metres yellow.
Adhesive-lined heat shrink boot for cable joints with moisture sealing.
Adhesive-lined heat shrink boot for secure cable joint sealing.
Straight heat shrink boot with adhesive lining for large diameter cable connections.
Adhesive-lined polyolefin heat shrink boot providing excellent cable sealing.
Black polyolefin straight boot with adhesive provides sealed cable connection protection.
Two-metre blue polyurethane recoil hose for pneumatic tools and equipment.
Screened low voltage audio signal cable for professional sound and control applications.
Three-core unscreened cable for basic industrial signal and control wiring.
Low-resolution incremental encoder with 100 ppr for basic speed measurement applications.
Five-volt single-pole relay for basic control applications with wire leads.
Simple on-off controller with PT100 sensor for basic heating and cooling applications.
Basic through-hole toggle switch for low-voltage circuit board mounting.
Blue EPDM hose for welding gas and fluid lines, 10mm bore, 25 meters.
TPE air hose for compressed air lines, meets EN14594 standard, 25 meters.
Coarse-filtration Parker filter for low-pressure bulk fluid return and cooling lines.
Single-pair unscreened twisted pair cable for basic data and control signal transmission.
A sealed limit switch with a roller arm that detects when machinery reaches a certain position, commonly used on moving equipment in factories and production lines.
Fuel and oil transfer hose rated for high-temperature engine bay applications.
Yellow EPDM hose for air and water, 25mm diameter, 20 bar rated.
Small EPDM o-ring for general industrial sealing applications.
Three-meter rigid aluminium pipe for compressed air distribution.
Lightweight 15mm aluminium tube for compressed air systems.
A rugged industrial limit switch with a roller lever that detects machine position and triggers safety circuits in wet or dusty factory environments.
High-temperature EPDM hose for water and air, 25mm diameter, handles 140°C.
Flexible blue EPDM hose for air and water, 9.5mm inner diameter, 25m roll.
A rugged industrial limit switch with a roller lever that detects position or movement in wet and dusty environments, rated for up to 240V AC and 5A current.
A rugged industrial limit switch with a plunger actuator that detects when moving equipment reaches a position limit, stopping or reversing motion to prevent damage.
TPE compressed air hose, 6.3mm diameter, 25 meters, 20 bar rated.
Silver aluminium tube for large compressed air applications.
A rugged waterproof limit switch with a roller lever that detects machine position and triggers electrical control circuits in industrial equipment.
A rugged industrial limit switch with plunger actuator that detects machine position and triggers electrical actions, rated for wet and dusty environments.