A grey electrical connector block for control panels that accepts small wires via simple push-in connections.
A grey electrical connector block that snaps onto DIN rail and accepts push-in wires up to 30 amps.
Easy-to-use four-stack electrical connector for industrial control panels that accepts wires without tools.
Industrial electrical connector block that mounts on DIN rail and accepts wires up to 6mm² with simple push-in connection.
Industrial power distribution connector block with 19 terminals that accepts wires up to 6mm² and handles 32 amps safely.
Orange electrical connector block that mounts on DIN rail and accepts wires up to 6mm thick using a push-in method.
Industrial electrical connector that clips onto DIN rail and accepts wires up to 4mm thickness, handles up to 32 amps.
A blue electrical connector block that snaps onto industrial control rails and accepts wires by pushing them in—no tools needed.
A blue snap-on wire connector for control panels that accepts cables up to 2.5mm thick and handles 8 amps.
Industrial wiring connector block that mounts on DIN rail and securely accepts small electrical wires without tools.
Green and yellow earth terminal block for industrial electrical panels that accepts 4mm² cable with a simple push-in connection.
A grey electrical connector block that mounts on DIN rails and accepts cables up to 6mm² using a simple push-in method.
Easy-to-use industrial electrical connector block that clips onto DIN rail and accepts wires without tools.
Industrial electrical connector block with 19 terminals, rated for 32 amps, that accepts standard industrial wires without soldering.
An industrial wiring connector block that mounts on DIN rail and accepts cables up to 6mm thick using simple push-in connection.
An ATEX-approved electrical connection block for hazardous industrial areas, accepting 6mm² cables with tool-free push-in connection.
A compact black electrical connector block that clips onto DIN rail and accepts up to eight wires simultaneously without tools.
Blue electrical connector block that mounts on DIN rail and accepts wires up to 10 mm² using simple push-in method.
A blue electrical connector block that mounts on standard DIN rails and accepts up to 4mm² cables with simple push-in wire insertion.
Blue industrial connector block that accepts 4mm² wires using push-in connection, rated for up to 24 amps at 500 volts.
A grey modular wire connector block for industrial control panels that accepts wires up to 4mm thick and is rated for 16 amps.
A modular three-pole grounding terminal block for DIN rail panels that accepts small wires and grounds equipment safely.
Blue electrical connector block that snaps onto a DIN rail and accepts wires without tools, rated for up to 51 amps.
Industrial electrical terminal block that mounts on standard DIN rail and accepts small to medium wires using a simple push-in method.
A compact electrical connector block that mounts on DIN rail and accepts cables up to 2.5mm thickness for panel wiring and machine connections.
A small black fused connector block that mounts on DIN rail, accepts wires by pushing them in, and protects 24V circuits up to 10 amps.
A compact, easy-to-use grounding connector that snaps onto standard industrial rail and accepts small-to-medium wires without tools.
A grey electrical connector block that mounts on standard rail and quickly accepts wires from 0.14 to 4mm thick without tools.
Black fused electrical connector that snaps onto standard DIN rail and accepts wires without tools, rated for 10 amps.
A black 16-position electrical connector that snaps onto DIN rail and accepts wire connections by simply pushing wires into slots.
Green electrical connector block for control panels and machines that accepts wires up to 4mm thickness and clips onto standard DIN rail.
A blue electrical connector that quickly snaps into DIN rail systems, accepting 4mm² cables safely up to 24 amps and 500 volts.
Snap-onto-rail electrical connector block for wiring control panels and machines, accepts standard industrial cables up to 6mm thick.
Grey double-layer terminal block that clips onto DIN rail and accepts small electrical wires with a simple push-in connection.
Safety-certified electrical connector block for dangerous area wiring, rated 24 amps, accepts 4mm² cables without tools.
A certified electrical terminal block designed for safe wiring in explosive and hazardous environments, accepting 50mm² cables with simple push-in connections.
Heavy-duty electrical distribution terminal block for industrial machines, accepting 13 separate power connections safely up to 690 volts.
Grey electrical terminal block that mounts on DIN rail and accepts 1.5mm² wires via push-in connection for industrial control panels.
Grey multi-way electrical connector for safely distributing power in control panels and machinery, accepts cables up to 6mm and handles 32 amps.
A grey plug-in connector block for wiring electrical panels, rated for up to 800 volts, accepting wires from 4mm² to 10 gauge without tools.