&sirasi=0)
A compact grey connector block that mounts on DIN rail to safely join and distribute electrical wires in control panels and distribution cabinets.
A white connector block that mounts on DIN rail and safely joins small electrical wires in control panels and machinery.
Resettable 24V fuse protecting circuits from overcurrent automatically without replacement.
&sirasi=0)
Two-core black power cable, 50 meters, fire-safe for industrial and building installations.
Compact resettable fuse protecting 6V circuits from overload and short circuits.
Snap-on white markers for tiny wires 0.8mm to 2.2mm, resists vibration and heat.
5V reed relay with changeover contact for dual-state switching applications.
A small orange electrical connector block that mounts on DIN rails and safely connects wires in control panels and machinery.
A black electrical connector block that attaches to DIN rails in control panels, rated for standard industrial currents and temperatures.
A grey tactile push-button switch for keyboards and control panels that clicks when pressed, rated for low-current circuits.
Grey PVC control cable with 2 cores, 2.5mm² cross-section, 50 meters long for industrial equipment.
Burkert direct solenoid valve for fuels, oils, water and industrial fluids.
Twelve-volt automotive relay for vehicle electrical switching with quick-connect terminals.
Self-adhesive silicone gel pads dampen vibration and noise in tight spaces.
Thin silicone gel tape for vibration damping in electronics and machinery.
Heat-resistant silicone damping pad for high-temperature machinery applications.
Electric solenoid valve for controlling air, water, gas, and oil flow in industrial applications.
Resettable safety fuse for electronics that resets automatically after overcurrent fault.
A rugged 2-position key-operated switch with waterproof protection, used to control industrial equipment and machinery from panel-mounted locations.
A heavy-duty 2-position selector switch head for controlling industrial equipment, built to withstand dust and water spray in harsh environments.
A sealed 2-axis joystick switch with Hall Effect technology for controlling equipment in dusty or wet industrial environments.
A robust 2-position selector switch head for controlling machinery and equipment on factory floors, construction sites, and industrial installations in hot or cold climates.
A durable 2-position latching key switch for industrial control panels that withstands dust, water, and extreme temperatures.
A green-and-yellow grounding connector that snaps onto DIN rail and safely clamps earth wires up to 2.5mm² in size.
A heavy-duty 2-position key-operated switch for industrial machinery and control panels that stays in place once turned and works in wet or dusty environments.
Non-resettable fuse for circuit boards protecting equipment up to 2.5 amps.
2-amp grey mini blade car fuse for 32V automotive and electrical circuits.
A heavy-duty 2-position key-operated latching switch for industrial control panels, offering IP66/67/69K protection suitable for harsh outdoor and wet environments.
2-core screened compact control cable for industrial signal and power control.
Blue screw-terminal connector block for mounting on DIN rail in electrical panels, rated for 24 amps and wires up to 2.5mm².
Three-phase 2.5kV surge protector with 25kA capacity for industrial electrical panels.
A rugged 2-position key-operated selector switch for industrial control panels, rated for harsh wet and dusty environments.
A rugged 2-position key switch head for industrial control panels that stays in place when turned, withstands water and dust in harsh environments.
A rugged 2-position key-operated latching switch with 30mm panel cutout, designed for secure equipment control in wet and harsh industrial environments.