&sirasi=0)
A compact grey connector block that mounts on DIN rail to safely join and distribute electrical wires in control panels and distribution cabinets.
A white connector block that mounts on DIN rail and safely joins small electrical wires in control panels and machinery.
Resettable 24V fuse protecting circuits from overcurrent automatically without replacement.
&sirasi=0)
Two-core black power cable, 50 meters, fire-safe for industrial and building installations.
Compact resettable fuse protecting 6V circuits from overload and short circuits.
Snap-on white markers for tiny wires 0.8mm to 2.2mm, resists vibration and heat.
Two-pole relay for switching dual circuits with 120V AC coil control.
5V reed relay with changeover contact for dual-state switching applications.
A small orange electrical connector block that mounts on DIN rails and safely connects wires in control panels and machinery.
A black electrical connector block that attaches to DIN rails in control panels, rated for standard industrial currents and temperatures.
A grey tactile push-button switch for keyboards and control panels that clicks when pressed, rated for low-current circuits.
Two-pole changeover relay for industrial control and automation circuits.
Grey PVC control cable with 2 cores, 2.5mm² cross-section, 50 meters long for industrial equipment.
Burkert direct solenoid valve for fuels, oils, water and industrial fluids.
Twelve-volt automotive relay for vehicle electrical switching with quick-connect terminals.
Self-adhesive silicone gel pads dampen vibration and noise in tight spaces.
Heat-resistant silicone damping pad for high-temperature machinery applications.
Thin silicone gel tape for vibration damping in electronics and machinery.
Electric solenoid valve for controlling air, water, gas, and oil flow in industrial applications.
Resettable safety fuse for electronics that resets automatically after overcurrent fault.
A rugged 2-position key-operated switch with waterproof protection, used to control industrial equipment and machinery from panel-mounted locations.
A heavy-duty 2-position selector switch head for controlling industrial equipment, built to withstand dust and water spray in harsh environments.
A sealed 2-axis joystick switch with Hall Effect technology for controlling equipment in dusty or wet industrial environments.
A robust 2-position selector switch head for controlling machinery and equipment on factory floors, construction sites, and industrial installations in hot or cold climates.
A durable 2-position latching key switch for industrial control panels that withstands dust, water, and extreme temperatures.
A green-and-yellow grounding connector that snaps onto DIN rail and safely clamps earth wires up to 2.5mm² in size.
A heavy-duty 2-position key-operated switch for industrial machinery and control panels that stays in place once turned and works in wet or dusty environments.
Non-resettable fuse for circuit boards protecting equipment up to 2.5 amps.
2-amp grey mini blade car fuse for 32V automotive and electrical circuits.
A heavy-duty 2-position key-operated latching switch for industrial control panels, offering IP66/67/69K protection suitable for harsh outdoor and wet environments.
2-core screened compact control cable for industrial signal and power control.
Blue screw-terminal connector block for mounting on DIN rail in electrical panels, rated for 24 amps and wires up to 2.5mm².
Three-phase 2.5kV surge protector with 25kA capacity for industrial electrical panels.
A rugged 2-position key-operated selector switch for industrial control panels, rated for harsh wet and dusty environments.