Threaded PVC tee for 25mm pipes, splits flow with three-quarter-inch port.

PVC tee-shaped fitting for splitting water flow into three equal directions.

Right-angle PVC elbow for sharp turns in pipe installations and plumbing.

PVC 90-degree elbow bends 25mm water pipes at right angles.

PVC right-angle bend for 63mm pipes in water systems and drainage layout.

90-degree PVC elbow fitting directs 32mm pipes at right angles.

90-degree PVC elbow for 2-inch pipes, bends large water lines.

PVC tee fitting for branching off a supply line at right angles.

Large PVC elbow for changing direction of 1.5 inch diameter pipes.

White PVC 90-degree elbow fitting for 40mm pipes, water and drainage systems.

White PVC 90-degree elbow fitting for 32mm pipes, drainage and water systems.

Threaded PVC elbow for pressurised water systems and installations.

Threaded PVC elbow for changing pipe direction at right angles.

PVC 90-degree elbow bends water pipes at right angles.

PVC ninety-degree elbow for fifty-millimetre diameter plastic water pipes.

90-degree PVC elbow for large 63mm pipes, changes flow direction.

PVC elbow fitting for redirecting 25mm pipes at right angles in plumbing systems.

Large PVC 90-degree elbow for 2-inch pipes in main water lines.

PVC ninety-degree elbow for half-inch diameter water pipes.

Right-angle PVC elbow for sharp corners in medium-sized pipe networks.

PVC equal tee for 50mm pipes used in water distribution and plumbing networks.

Threaded PVC elbow fits standard half-inch water supply systems.

PVC 90 degree elbow for 40mm pipes in water distribution systems.

PVC reducer tee connector for 22mm pipes, push-fit installation for water systems.

PVC elbow fitting for 32mm pipes, changes water or fluid flow direction 90 degrees.

PVC elbow fitting for 4-inch pipes, changes water or liquid flow direction at 90 degrees.

PVC 90-degree elbow fitting for 25mm pipes with threaded connections.

PVC 90-degree threaded elbow for 20mm pipes with half-inch thread.

PVC 90 degree elbow for large 3 inch pipes in main water lines.

PVC tee for splitting larger water pipes into three equal directions.

PVC equal tee for three-eighth-inch pipes with 90-degree branching.

PVC 90 degree elbow bends 3/4 inch pipes at right angles.

PVC plastic elbow pipe fitting for connecting 1.25 inch diameter pipes at right angles.

90-degree PVC elbow for 1.25-inch pipes, changes pipe direction.