Ninety degree plastic pipe elbow connector for forty millimetre water and drainage systems.

PVC tee-shaped fitting for splitting water flow into three equal directions.

PVC tee fitting for branching off a supply line at right angles.

90-degree PVC elbow fitting directs 32mm pipes at right angles.

White PVC 90-degree elbow fitting for 32mm pipes, drainage and water systems.

White PVC 90-degree elbow fitting for 40mm pipes, water and drainage systems.

PVC elbow fitting for redirecting 25mm pipes at right angles in plumbing systems.

PVC elbow fitting for 4-inch pipes, changes water or liquid flow direction at 90 degrees.

PVC 90-degree elbow fitting for 25mm pipes with threaded connections.

PVC plastic elbow pipe fitting for connecting 1.25 inch diameter pipes at right angles.

PVC tee fitting creates three-way branches from 3/4-inch pipe.

90-degree plastic pipe elbow fitting for 2-inch diameter plumbing and pipeline systems.

PVC elbow fitting for 32mm pipes, changes water or fluid flow direction 90 degrees.

PVC tee fitting for 32mm pipes to split flow in three directions.

PVC equal tee fitting for joining three 20mm pipes at right angles.

PVC equal tee fitting for joining three 40mm pipes at right angles.

Right-angle PVC elbow for sharp turns in pipe installations and plumbing.

PVC elbow pipe fitting for redirecting water flow in plumbing systems.

PVC equal tee fitting for joining three pipe sections at right angles.

PVC tee fitting that connects three pipes at 90-degree angles for water and fluid systems.

Push-fit CPVC equal tee connector for 15mm pipes in plumbing systems.

Push-fit tee connector for splitting water pipes in three directions equally.

PVC tee fitting for joining three pipe sections at right angles in plumbing systems.

Push-fit tee connector allows three-way 15mm pipe branches.

90-degree PVC elbow for 1.25-inch pipes, changes pipe direction.

PVC equal tee for three-eighth-inch pipes with 90-degree branching.

Push-fit water trap tee connector for 22mm plastic pipes in plumbing systems.

Ninety-degree PVC elbow fitting for changing pipe direction in two-inch water systems.

PVC 90-degree elbow fitting 1.5-inch for right-angle pipe changes.

PVC pipe tee connector for splitting water lines in three directions at 90 degrees.

Push-fit copper tee fitting for 15mm pipes, no soldering required.

Push-fit CPVC elbow for quick connection of medium diameter pipes.

Push fit brass tap connector for 15mm polybutylene pipe to water tap.

Push fit copper elbow for fifteen millimeter pipes in plumbing installations.