PVC equal tee fitting for joining three pipe sections at right angles.

PVC tee fitting for 32mm pipes to split flow in three directions.

Small PVC tee for joining three small diameter pipes at right angles.

PVC equal tee fitting for joining three 1.5 inch pipes at right angles.

PVC tee for joining three equal diameter pipes at right angles.

PVC pipe tee connector for splitting water lines in three directions at 90 degrees.

PVC equal tee for three-eighth-inch pipes with 90-degree branching.

Push-fit tee connector for splitting water pipes in three directions equally.

PVC tee fitting for joining three pipe sections at right angles in plumbing systems.

PVC tee fitting creates three-way branches from 3/4-inch pipe.

Threaded PVC tee for 25mm pipes, splits flow with three-quarter-inch port.

PVC tee fitting that connects three pipes at 90-degree angles for water and fluid systems.

Copper three-way connector for 22mm and 15mm pipes in modern plumbing.

Push-fit CPVC equal tee connector for 15mm pipes in plumbing systems.

PVC tee fitting for branching off a supply line at right angles.

PVC reducer tee connector for 22mm pipes, push-fit installation for water systems.

Push-fit PVC tee connector for 22mm pipes in water supply and plumbing networks.

ABS tee fitting for 1-inch pipes with cement joint connection.

ABS tee fitting for 1.25-inch pipes with cement connection.

CPVC 90-degree tee connector for 40mm pipes in plumbing networks.

ABS tee fitting for 1.5-inch pipes with cement-on socket.

ABS tee fitting for 3/4-inch pipes, splits water flow in three directions.

CPVC ninety-degree tee fitting for twenty-five-millimetre pipe branching.

CPVC ninety-degree tee junction for twenty millimeter pipes.

ABS tee junction for splitting drainage pipes into multiple directions.

Push-fit copper tee fitting for 15mm pipes, no soldering required.

Push-fit water trap tee connector for 22mm plastic pipes in plumbing systems.

Push-fit tee connector allows three-way 15mm pipe branches.

Plastic three-way right-angle junction for 2-inch pipes in drainage systems.

Ninety degree plastic pipe elbow connector for forty millimetre water and drainage systems.

90-degree PVC elbow fitting enables right-angle pipe connections.

PVC 90-degree elbow for 20mm pipes in small water distribution systems.

Ninety-degree PVC elbow fitting for changing pipe direction in two-inch water systems.

Quick-connect plastic elbow for 15mm PVC water and air lines.