Large hand reamer for finishing 10mm diameter holes in metal.
Large morse taper reamer for precision hole finishing in industrial drilling machines.
Single long-armed imperial hex key in 9/64 inch size.
Single piece aluminium shaft collar for 10mm diameter shafts.
Two-piece aluminium shaft collar for 10mm diameter shafts.
Nine-piece round metric hex key set from 2.5 to 10mm for versatile use.
Nine-piece metric L-shaped hex key set covering 1.5mm to 10mm range.
9-piece metric L-shaped hex key set with ball ends for angled access.
Stainless steel two-piece shaft collar with clamp screw for 10mm shafts.
Medium HSS hand reamer for accurate hole enlargement in metal.
9/16 inch hex bit for extra-large socket fastening.
Lightweight aluminum shaft collar for securing rotating shafts in industrial machinery and equipment.
Small aluminium shaft collar with screw clamp for securing components on shafts.
Sliding block for 10mm strut profile with 10mm groove fitting.
9/16 inch hex socket wrench with polished finish.
Facom 9/16 inch standard socket for common maintenance and assembly work.
9/16 inch imperial socket with 1/2 inch drive for mechanical fasteners.
Facom 9/16 inch deep 12-point socket for accessing recessed fasteners safely.
Brass straight compression fitting for 10mm pipes.
Nine-foot serial cable connecting DB-9 to RJ-45 for Zebra printers and industrial devices.
Push-fit brass connector for 10mm pipes with compression olive seal.
9-inch steel wrench for gripping and removing oil filters.
Straight shank reamer for accurate hole finishing from 9.25 to 10mm.
Non-return valve with 10mm tube connections rated for vacuum and high pressure.
Brass stem adapter for 10mm push-fit pipes in straight configuration.
Single-mode fiber adapter for connecting different connector types in networks.
Pre-terminated duplex single-mode fibre optic cable with LC connectors for high-speed network connections.
High-speed steel slot drill for milling operations and precision cutting work.
Nine-piece metric hex key set with L-shaped handles, 1.5 to 10mm sizes.
Stainless steel shaft collar with clamp screw for securing shafts in machinery and equipment.
Nine-piece L-shaped hex key set for metric fasteners 1.5mm to 10mm.
Nine-piece metric L-shaped hex key set with ball ends, sizes 1.5mm to 10mm.
Ruland beam coupling for medium machinery shafts with minimal deflection.
Five-piece L-shaped hex key set for equipment maintenance and assembly work.
Heavy-duty impact socket for pneumatic tools and fastening work on machinery.
Deep socket for accessing long fasteners in confined areas.
Small imperial socket for precision fastening and assembly.
Flexible socket for reaching fasteners at angles and tight spaces.
Standard impact socket for half-inch pneumatic tools on American fasteners.
Pneumatic non-return valve preventing backflow in air systems up to 990 kPa.