Complete 58-piece clamp set with 200mm opening for engineering and assembly work.
Comprehensive 58-piece clamp set with 200mm capacity for workshop assembly work.
58-piece VDE-approved engineers tool kit with case including voltage tester and ratchets.
Eight-piece comprehensive circlip plier set for professional retaining ring removal.
Grey PVC end piece with screwed access cover for 32mm drain inspection.
Corner location pieces for Rittal VX25 baying enclosure base assembly.
PVC access piece with screw-on cover for drainage system inspection.
Three-piece pin punch set with small sizes for precision metal marking work.
Eight-piece Knipex circlip set with angled and straight tips for all snap ring orientations.
Six-piece Flex-Dot screwdriver set with varied heads for general assembly use.
Six-piece Flex-Dot screwdriver set with varied heads for general assembly use.
Three-pole 12V DC relay for 10A switching with standard coil suppression and status indication.
Network surveillance camera with high resolution and night vision for facility monitoring.
Large twelve-piece phillips screwdriver set for comprehensive fastening needs.
Metcal soldering iron hand piece for precise electronics assembly and PCB work.
Replacement hand piece for Thermaltronics TMT-9000S soldering station system.
Ten-piece thermoplastic trimmer tool set for various cutting and trimming tasks.
Two-piece stainless steel shaft collar for 8mm diameter shafts.
Six-piece plier set with eight to sixteen millimetre jaw for cutting and gripping tasks.
Two-piece bearing puller with 140 to 185mm capacity for bearing removal.
Soldering hand piece for Metcal soldering systems.
Nylon T-piece junction fitting for 16mm conduit cable routing and branching.
Eaton motor protection breaker for large motors at 690V high voltage.
Handheld iron piece for Thermaltronics soldering stations enabling precise component connection.
Handheld soldering iron piece compatible with Metcal T4 tip series for precision work.
Complete 26-piece screwdriver bit set with hex, torx, phillips and slotted heads for general maintenance.
Clamping piece accessory for Festo EV series pneumatic valve systems.
Benchtop stereo microscope with LED lighting and adjustable magnification for laboratory use.
Benchtop stereo microscope with halogen lighting for binocular inspection work.
Two-piece mitre clamp for joining wood pieces at precise angles.
Professional trinocular microscope with halogen lighting for research and laboratory work.
Pneumatic clamping fixture piece for Festo EV series equipment.
Clamping piece accessory for Festo EV-series pneumatic proportional valves.
Clamping piece accessory for Festo EV-series pneumatic proportional valves.
Festo clamping piece for EV series pneumatic valve and control systems.
Gray PVC end cap with screwed inspection cover for 160mm drainage pipes.
Seven-piece hexagon bit set for socket screw fastening.
Norgren clamping piece for R73G pneumatic air preparation regulator.