Heavy brass euro cylinder lock with equal pin distribution for superior security.
20mm brass 45-degree elbow fitting rated IP66/67/68 for cable routing and protection.
Grey PVC 45-degree bend for 250mm sewer pipes, push-fit joints.
Grey PVC 45-degree elbow 75mm for gradual drainage pipe angles.
Grey PVC 45-degree elbow 40mm for gradual drainage pipe angles.
ABS 45 degree elbow fitting for cementing half inch pipes at angle.
PVC 45-degree elbow for 20mm pipes using cement connection.
Square PVC 45-degree bend fitting for directing rainwater flow in guttering systems.
Grey PVC 45-degree bend for moderate angle sewer pipe connections.
45-degree ABS elbow changes 1.5 inch pipe direction gradually.
Large mobile charging cart securely charges 45 tablets or mobile devices.
Aluminium 45-degree connector for 45x45mm strut profiles.
Aluminium 45-degree connector for 45x45mm strut profiles.
Aluminium 45-degree connector for 45x45mm strut profile systems.
45-degree aluminium connector for 45x45mm strut profiles with 10mm groove.
Green PPR 45-degree elbow for angled water pipe routing and installation.
Black plastic 45 degree bend for 110mm drainage pipes, standard connection.
White PVC 45-degree elbow 40mm for gradual drainage pipe angles.
CPVC 45-degree elbow for directional changes in hot-water and industrial piping.
Safety boots with steel toe, ankle support and anti-static sole for industrial work.
Grey PVC 45-degree elbow bend for angled drainage pipe connections.
Normally closed contact block for EAO 45 series push button switches.
Grey PVC 45-degree elbow for 110mm drainage pipe connections.
A heavy-duty three-position rotary switch with a black handle for controlling equipment at up to 600 volts, commonly used on machine control panels and electrical switchboards.
45-degree PVC bend for 100mm rainwater drainage piping.
45-degree elbow bends 16mm uPVC pipes at gentle angle.
45-degree PVC tee connector for rainwater pipe splitting and branching.
45-degree PVC bend for angling 70mm rainwater drainage lines.
45-degree CPVC elbow for 32mm pipes, angles pipe connections.
45-degree PVC tee for splitting 80mm rainwater drainage pipes.
White plastic 45-degree tee connector for 32mm drainage.
Green PPR 45-degree elbow for changing pipe direction in large systems.
Green PPR 45-degree elbow for angled small-diameter water piping.
45-degree angled PVC elbow for gentle direction changes in water systems.
PPR 45-degree elbow 90mm for changing water pipe direction gradually.
45-degree CPVC elbow for 20mm pipes, angles smaller pipe connections.
45-degree angled PVC elbow for gradual bends in larger water pipes.
PVC 45-degree elbow fitting for 40mm pipes in water and industrial systems.
45-degree PVC drainage bend for gradual drainage pipe direction changes.
Grey PVC 45-degree bend connector for indoor drainage and plumbing systems.