45-degree aluminium connector for 45x45mm strut profiles with 10mm groove.

Miter angle gauge for measuring 45 to 90 degree angles in construction and manufacturing.

20mm brass 45-degree elbow fitting rated IP66/67/68 for cable routing and protection.

One-hundred eighty degree angle gauge for carpentry and construction work.

45-degree angled connector for 30x30mm profiles with 8mm groove slots.

Aluminium 45-degree connector joins square profiles at diagonal angles for frames.

Heavy brass euro cylinder lock with equal pin distribution for superior security.

Grey PVC 45-degree bend for 250mm sewer pipes, push-fit joints.

Grey PVC 45-degree elbow 40mm for gradual drainage pipe angles.

Grey PVC 45-degree elbow 75mm for gradual drainage pipe angles.

Diagonal connector piece for creating 45-degree joints in industrial strut structures.

Grey PVC 45-degree bend for moderate angle sewer pipe connections.

Grey PVC 45-degree angled tee for sewer drainage direction changes.

Grey PVC angled tee junction for combining three drainage pipe lines at 45 degrees.

45-degree ABS elbow changes 1.5 inch pipe direction gradually.

45-degree PVC bend for moderate angle pipe connections in sewers.

Green PPR 45-degree elbow for angled small-diameter water piping.

Green PPR 45-degree elbow for angled water pipe routing and installation.

ABS 45 degree elbow fitting for cementing half inch pipes at angle.

Three-legged angle gauge for measuring and checking angles up to 360 degrees in construction.

Aluminium 45-degree connector for 45x45mm strut profiles.

White PVC 45-degree elbow 40mm for gradual drainage pipe angles.

Aluminium 45-degree connector for 45x45mm strut profiles.

Aluminium 45-degree connector for 45x45mm strut profile systems.

Large angled reducer tee for stepped sewer pipe connections.

Angled PVC reducer tee for branching smaller drain lines.

PVC forty-five degree elbow for half-inch pipe direction changes.

CPVC 45-degree elbow for directional changes in hot-water and industrial piping.

Aluminium 45-degree connector for 40mm strut profiles with M8 threading.

PVC 45-degree elbow for 20mm pipes using cement connection.

Square PVC 45-degree bend fitting for directing rainwater flow in guttering systems.

Large mobile charging cart securely charges 45 tablets or mobile devices.

Grey PVC 45-degree elbow bend for angled drainage pipe connections.

45-degree angled small PVC tee for branch drainage connections.

PVC plastic elbow fitting for forty-five degree pipe direction changes in plumbing.

Angled PVC pipe clamp saddle for connecting branch drains to main pipes.

45-degree CPVC elbow for 32mm pipes, angles pipe connections.

PPR 45-degree elbow 125mm for bending large water pipes with gradual angles.

Large 45-degree angled PVC tee for main drainage connections.

White PVC 45-degree elbow for angled drainage connections.