Ultrasonic thickness tester for materials and coatings measuring 0.75mm to 80mm range.
Ultrasonic thickness meter measuring up to 100mm with 0.01mm precision resolution.
Compact motor protection breaker from ABB for ultra-low current motor protection.
Thin enamelled copper wire for small electrical components and precision winding applications.
Ultra-precision force and torque gauge with RS232/USB output for demanding laboratory testing.
Digital height gauge measuring up to 600mm for marking and measuring component heights.
Digital thickness meter measuring material thickness from 0.75mm to 80mm.
&sirasi=0)
Eaton direct-on-line motor starter for small three-phase motors up to 0.18 kilowatt.
&sirasi=0)
Eaton three-phase motor starter for small industrial motors up to 0.18 kW.
Current measurement module for precise electrical current monitoring in control systems.
Four step aluminium staircase for safe access to heights up to 0.88m.
High-temperature infrared sensor for measuring 0 to +250°C with analog output.
Three-phase motor protection breaker for small industrial motors up to 690 volts.
Digital height gauge measuring to 300mm with calibration for precision engineering.
Four-step ladder reaching 0.88 metres for general maintenance and work access.
Imperial dial indicator for checking runout and variations up to half inch.
Short USB 3.0 cable connecting computers and devices quickly.
Short USB 2.0 cable connecting USB B male to female connectors for devices.
Short high-speed USB 3.0 cable for connecting to micro USB mobile devices.
Short yellow fiber optic patch cable for high-speed network connections.
Tiny 0.7mm metric hex key in chrome vanadium for delicate work.
Ultrasonic thickness meter for measuring metals and materials from thin to 80mm thick.
Lightweight fibreglass four-step ladder for safe access work at under one metre height.
Three-step rubber platform reaching 0.69m height with anti-slip safety surface.
&sirasi=0)
Eaton direct-on-line motor starter for small three-phase motors up to 180 watts.
SMC pneumatic regulator controls compressed air pressure from 0.1 to 0.7 MPa for industrial systems.
Hand ratcheting crimp tool for fine wire terminals and splices.
Fine-tip technical pen with 0.35mm point for precise drawing.
Metric dial indicator measuring to 10mm with 0.01mm resolution for precision work.
High-speed external drive for video and media file backup.
Mitutoyo metric DTI gauge measuring 0.8mm for precision engineering applications.
Snap-on cable marker labeled '0' for tiny wires 0.8 to 2.2mm.
Imperial dial indicator measuring 0.5 inch with UKAS calibration for precision work.
Assorted snap-on markers numbered 0-9 for tiny wires 0.8-2.2mm labeling.