Ultrasonic thickness meter measuring up to 100mm with 0.01mm precision resolution.
Firmware upgrade for Honeywell X-series and GR chart recorders.
Firmware upgrade package for Honeywell X-series and GR chart recorders.
Software upgrade for Honeywell X-series and GR chart recorders for data acquisition.
Digital thickness meter measuring material thickness from 0.75mm to 80mm.
Ultrasonic thickness tester for materials and coatings measuring 0.75mm to 80mm range.
Ultrasonic thickness meter for measuring metals and materials from thin to 80mm thick.
Precision ultrasonic thickness meter measuring materials from 3mm to 300mm with high accuracy.
Small thermal circuit breaker protecting low-current electrical circuits in control panels.
Compact thermal breaker for low-current circuit protection in industrial control panels.
Calibrated digital thickness gauge with 0.01mm resolution for precision material measurement.
Highly accurate digital DC voltmeter with LCD display for precision measurement.
Small SMC pneumatic gauge for low pressure systems up to 0.4 MPa.
Small analogue pressure gauge for pneumatic systems up to 0.4 MPa.
Precision hydrometer for measuring liquid density between 0.8 and 1.0 specific gravity.
Metric dial test indicator measuring ±0.4mm with high precision in quality control.
Metric dial indicator measuring to 10mm with 0.01mm resolution for precision work.
Mitutoyo metric DTI gauge measuring 0.8mm for precision engineering applications.
Compact motor protection breaker from ABB for ultra-low current motor protection.
Ultra-compact 0.125 hp Welch piston vacuum pump for small laboratory and portable applications.
Compact analogue gauge for low-pressure pneumatic monitoring and systems.
Thin enamelled copper wire for small electrical components and precision winding applications.
Ultrasonic thickness meter for measuring material thickness from 1.2 to 230 millimeters.
Portable digital thickness meter for measuring material thickness up to 230mm with high precision.
SMC low pressure gauge for pneumatic systems up to 0.4 megapascal.
SMC pressure gauge for pneumatic systems measuring up to 0.7 megapascal.
Ultra-precision force and torque gauge with RS232/USB output for demanding laboratory testing.
Multi-range on-delay timer for flexible seconds to days timing in industry.
Large-range metric dial indicator for measuring variations up to 100mm in manufacturing.
Dual-reading dial test indicator for metric and imperial measurements up to 0.8mm.
0.01 ohm current shunt resistor for DAS1700 data acquisition systems.
Pilot-operated solenoid valve for automated fluid control in industrial systems.
SMC ultra-fine mist separator with 0.01 micron filtration for precision pneumatic applications.
Torsion spring for RX 01 pliers to restore jaw action and spring tension.
&sirasi=0)
Eaton direct-on-line motor starter for small three-phase motors up to 0.18 kilowatt.
SMC precision mist separator with 0.01 micron filtration for demanding pneumatic applications.
&sirasi=0)
Eaton three-phase motor starter for small industrial motors up to 0.18 kW.
Ultra-fine pneumatic air filter removes particles down to 0.01 microns for clean compressed air.
Current measurement module for precise electrical current monitoring in control systems.
High-temperature infrared sensor for measuring 0 to +250°C with analog output.