Large-range metric dial indicator for measuring variations up to 100mm in manufacturing.
Digital thickness meter measuring material thickness from 0.75mm to 80mm.
Ultrasonic thickness tester for materials and coatings measuring 0.75mm to 80mm range.
Firmware upgrade package for Honeywell X-series and GR chart recorders.
Firmware upgrade for Honeywell X-series and GR chart recorders.
Software upgrade for Honeywell X-series and GR chart recorders for data acquisition.
Imperial dial indicator for checking runout and variations up to half inch.
Ultrasonic thickness meter for measuring metals and materials from thin to 80mm thick.
Precision external micrometer for measuring diameters and thicknesses up to 75mm in factories and workshops.
Ultra-precision metric dial indicator for measuring extremely small variations under 0.1mm.
Thin enamelled copper wire for electrical winding and light circuit applications.
Metric dial indicator for measuring small variations up to 1mm with micron-level precision.
Thin enamelled copper wire for electrical winding and transformer coil applications.
Precision hydrometer for measuring liquid density between 0.8 and 1.0 specific gravity.
Digital external micrometer for precise diameter measurement from 0 to 25mm.
Metric dial indicator measuring to 10mm with 0.01mm resolution for precision work.
Imperial dial indicator measuring 0.5 inch with UKAS calibration for precision work.
Ultrasonic thickness meter measuring up to 100mm with 0.01mm precision resolution.
Compact motor protection breaker from ABB for ultra-low current motor protection.
Wide-angle motion detector for security systems and automatic lighting control.
Industrial infrared temperature sensor with 4-20 mA output for high-temperature monitoring up to 500°C.
Precision depth micrometer for measuring holes and recesses up to 25mm with high accuracy.
Precise metric dial indicator for measuring distances up to 60mm with micron accuracy.
DIN rail timer relay for 24-240V with multi-range timing from seconds to days.
Thin enamelled copper wire for small electrical components and precision winding applications.
Short pre-crimped black wire with Molex male Micro-Fit 3.0 connector.
Dial indicator measuring up to 12.7mm with both imperial and metric scales for engineering.
Thermostat for heating and cooling systems with 10A contact rating and 0-60°C temperature range.
Digital plunger indicator for measuring variations up to 25.4mm with 0.01mm precision.
Short pre-crimped wire with female Micro-Fit 3.0 connector and unterminated end.
Short pre-crimped wire with female Micro-Fit 3.0 connector for compact electronics assembly.
Plunger dial indicator for measuring small movements up to 10mm with 0.01mm accuracy.
Short-range infrared photoelectric sensor for proximity detection.
Mitutoyo digital plunger indicator measuring 12.7mm with 0.001mm resolution metric.
Short-range barrel sensor with PNP output for proximity detection in compact machinery installations.
Ultra-precision force and torque gauge with RS232/USB output for demanding laboratory testing.
Lead-based solder wire for joining electronic components and circuit boards during assembly.
Hauber Elektronik vibration sensor monitors equipment condition across wide temperature range.
Traditional lead solder wire with rosin flux for general electronics soldering.
Lead-free solder wire for electronics assembly and circuit board soldering work.