Two-pole miniature circuit breaker rated 1A for AC mains protection in single and three-phase installations.
Waterproof brass cable gland for M12 threads, secures cables 3-6.5mm diameter in outdoor equipment.
SMC pneumatic regulator controls compressed air pressure from 0.5 to 8.3 bar for industrial machinery.
A protected electrical connector that screws onto DIN rail, blocks overcurrent, and handles up to 400V and 6.3 amps.
Two-pole 25A circuit breaker protecting industrial three-phase electrical circuits from overload and short circuits.
Industrial 80A four-pole safety switch protecting against electric shock and leakage in three-phase power systems.
A six-button membrane keypad with a 2-by-3 layout used for control input on industrial equipment and control panels.
Socomec FUSERBLOC 125A four-pole DIN rail fuse switch for industrial three-phase power distribution.
Four-pole residual current circuit breaker protects against electric shock and earth faults in three-phase systems.
SMC pneumatic regulator controls compressed air pressure from 0.5 to 8.3 bar for industrial machinery.
RS PRO single-mode fiber cable with FC-SC connectors, 3 meters, for long-distance networks.
3-meter OM3 multimode fibre optic patch cable with LC connectors for high-speed data networks.
ABB 40-amp four-pole residual current breaker for three-phase electrical protection and fault detection.
Heavy-duty four-pole isolator switch for safely disconnecting three-phase electrical circuits up to 100 amps.
Industrial molded case circuit breaker protecting 80-amp four-phase electrical systems from overload and faults.
Schneider Electric auxiliary contact block for TeSys contactors with 3 normally-open and 1 normally-closed contact.
Omron motor protection circuit breaker safeguards 10-amp three-phase motors from overload and short circuits.
Steel hex bolt 5/16 inch diameter, 3 inches long, Grade A quality for machinery assembly.
Energy-efficient LED emergency light that stays on during normal operation and provides 3 hours of backup lighting if power fails.
Steel hex socket cap screw, 5/8-11 x 3 inches, for industrial machinery and equipment assembly.
&sirasi=0)
A small push-button electrical switch for control panels and equipment that operates on 24V power with a 3 million operation lifespan.
Black dual USB wall outlet for charging phones and devices indoors, rated for 3 amps, fits directly on walls.
A fused electrical connector that clips onto standard DIN rails in industrial control panels, protecting circuits up to 6.3 amps.
Electronic ballast that controls fluorescent batten lights, fits standard 220–240 V power and works with 3 or 4 tubes.
A green indicator light that mounts on control panels to show when equipment is running or powered on, rated for 440V three-phase industrial systems.
Grey electrical connector block for control panels that holds wires securely with a spring clamp, rated for 250 volts and up to 6.3 amps.
Industrial-grade fused terminal block for connecting wires to control panels and electrical equipment, rated for 500 volts and 6.3 amps.
A wall-mounted LED emergency light that turns on automatically during power cuts and stays lit for 3 hours, suitable for indoor use in buildings.
Energy-saving LED light with motion sensor for inside industrial cabinets and equipment boxes, works on both single and three-phase power supplies.
A grey screw-clamp connector block for mounting on DIN rails in industrial control panels, rated for up to 250 volts and 6.3 amps.
A sturdy stand-up work light on three legs that extends to 1.3 meters tall, powered by electricity, for brightening outdoor work areas and construction sites.
A waterproof, dustproof momentary tactile switch rated for 50 mA at 24 V DC with a 3 mm button, designed for industrial control panels and rugged outdoor equipment.