A two-position latching key switch head used to control machinery and equipment in industrial and hazardous locations, operated by turning a key and holding its position until manually changed.

A heavy-duty industrial key-operated selector switch with three positions that holds its setting, rated for wet and dusty environments, commonly used to control machine startup and shutdown.

A 3-position key switch head that mounts in a 22mm panel opening and holds its position until manually turned, commonly used on industrial control panels to select between operating modes.

A grey wiring connector that snaps onto standard DIN rails and safely holds electrical wires up to 1.5mm thickness, rated for 500 volts and 17.5 amps.

A grey two-level terminal block that clips onto DIN rail and securely holds wires up to 4mm thick using spring clamps, suitable for industrial control panels.

A yellow weatherproof pendant control station box from Schneider Electric that holds three 22mm push buttons or switches for operating machinery on construction sites, factories, and industrial equipment.

A white plastic enclosure box made by Schneider Electric that holds 4 push buttons or control switches, commonly mounted on walls at factory or construction sites to control machinery.

A 3-position industrial selector switch with a short handle that mounts in a 22.5mm panel cutout and holds its position when switched, commonly used on control panels for machine operation.

A latching key switch head that mounts in a 16mm hole and holds its position until manually turned back, commonly used for machine start/stop or mode selection in industrial control panels.

A grey fibreglass control station enclosure from Schneider Electric that holds one 22mm push button or selector switch, commonly used on factory machines and production line control panels.

A blue electrical connector block that clips onto standard DIN rails and securely holds wires up to 2.5 mm² using spring pressure, commonly used in control panels and switchboards.

A three-position selector switch head with a short handle that mounts in a 22.5mm panel cutout and holds its position when switched, used for selecting between operational modes on industrial equipment and control panels.