Tedea Huntleigh compression load cell for 10kg capacity weighing and force measurement applications.
Air heater element, 600W, 240V for ducted and forced-air industrial heating systems.
Compact high-force screw actuator for heavy-duty industrial positioning and clamping tasks.
Festo long-stroke air bellows for heavy-duty damping and elastic force applications.
Staxx 2400W heavy duty breaker with 50J impact force for concrete demolition work.
Precision hex torque screwdriver for small fasteners requiring exact tightening force control.
Three-phase ironworker with 60 tons punch force for metal fabrication and pipe work.
Tiny 13-ton hollow plunger Enerpac cylinder for precision industrial pulling and adjustment.
Compact flat 20kg compression load cell for space-limited weighing and force applications.
Strain gauge meter for weighing and force measurement in industrial scales and load testing systems.
3-metre brown webbing lifting sling rated for 6 tonne straight pull loads.
Heavy-duty compression load cell for weighing and measuring forces up to 100 tonnes in industrial applications.
Two-meter black webbing sling rated for 2.5 tonne straight pull loads.
15mm suction cup with 8.5N holding force for small pneumatic gripping and assembly tasks.
20mm bellows NBR vacuum cup with 15N holding force for small pneumatic gripping tasks.
6-meter red round lifting sling rated for 5 tonnes in straight pull applications.
Heavy-capacity industrial load cell measuring compression forces up to two hundred eighty tonnes.
High-capacity 500mm servo-driven actuator with 20,000N force for heavy industrial applications.
Large 125mm flat NBR vacuum cup with 606N holding force for heavy industrial applications.
A protective plate that attaches to WAGO 769 connectors to support and protect cables from strain and pulling damage.
Electric linear actuator with 1-meter stroke and 10-tonne pushing force for industrial machinery.
Fixed torque screwdriver delivering precise 2Nm force for small fastener assembly and electronics work.
Compact stainless steel gas strut with ball socket, 160mm extended, 400N support force.
Heavy-duty belt-driven linear actuator for fast automated pushing and pulling in industrial machinery.
100mm flat NBR suction cup with 397N holding force for industrial pneumatic material handling.
Ultra-soft thermal pad for delicate electronics requiring minimal compression force during heat transfer.
30mm bellows NBR suction cup with 20.8N holding force for medium-duty pneumatic gripping.
1.5-meter yellow round polyester lifting sling rated for 3 tonne straight pull.
Large 100mm flat NBR suction cup with 503.6N holding force for heavy industrial gripping.
Siemens stainless steel load cell measures up to 10 tonnes compression force for industrial weighing systems.
Stainless steel gas strut with ball socket, 445mm extended length, heavy-duty 1200N force.
A protective plate that holds cables in place on electrical terminal blocks, preventing them from pulling loose in industrial equipment.
A protective plate that attaches to WAGO terminal block connectors to prevent cable pulling and damage during industrial electrical work.
A protective support plate that attaches to DIN rail terminal blocks to keep cables secure and prevent damage from bending or pulling.