A pushbutton actuator head that fits EAO Series 51 switches, used to replace worn or damaged button tops on industrial control panels.
A sealed tactile pushbutton switch rated IP60 for use in industrial control panels, keyboards, and electronic equipment where dust and moisture protection is needed.
Replacement cap for Nidec ultra-miniature illuminated pushbutton switches TR TM series.
A small orange pushbutton switch for use in electronic control panels, keyboards, and instrumentation where momentary contact is needed.
Green pushbutton for electrical panel control and machine operation interfaces.
Siemens metal pushbutton and signaling device for control panels and outdoor use.
Siemens red spring-return pushbutton with normally closed contact for safety.
Plunger-type micro switch 10A with quick-connect terminals for pushbutton control.
A small pushbutton switch with tactile feedback for electronics and control panels, rated for 12V DC circuits.
A plastic control station enclosure from Eaton's Moeller range that houses pushbuttons, switches and control components on industrial machinery and production lines.
A red-topped momentary pushbutton switch for control panels and electronic equipment that handles 50 mA at 12 volts with a 9.5 mm stem.
A small black pushbutton switch used in control panels, keyboards, and electronic devices that activates only while pressed.
Black latching pushbutton with one normally-open contact for control.
Red spring-return pushbutton with normally-closed contact for control.
A waterproof pushbutton switch with a glowing indicator light that connects to 24V electrical circuits in industrial control panels and equipment.
A small waterproof pushbutton switch for electronic equipment that can handle wet or dusty environments and momentary contact operations.
A blue momentary pushbutton switch rated IP54 for dusty or damp environments, commonly used in control panels and equipment interfaces.
A grey weather-resistant electrical control box designed to hold up to 5 pushbutton switches or indicators in industrial machinery and outdoor installations.
Mechanical pushbutton code lock with knob handle for entry doors in commercial buildings.
A small black pushbutton switch used in keyboards, control panels, and electronic devices to turn circuits on and off.
A red momentary tactile pushbutton switch for electronic devices and control panels, rated for 50mA with through-hole mounting.
A waterproof pushbutton switch with a lighted cap that stays momentary and handles 50 mA at 24 volts, used in control panels and machine interfaces where dust and moisture are present.
A small red pushbutton switch for electronic control panels and devices, rated for 24V DC operation with a light 50 mA current draw.
A protective decorative ring that surrounds an illuminated push button switch to provide waterproof protection in wet or dusty environments.
A stainless steel hex nut designed to secure Schurter push button switches to control panels and electrical enclosures.
A flush-mounted push button switch used to control electrical circuits and equipment in industrial control panels and machinery.
A red illuminated emergency stop button that mounts on control panels to safely shut down machinery; it has a twist-release design to prevent accidental reactivation.
A replacement push button actuator for EAO Series 14 modular switches used in industrial control panels and machinery interfaces.
A red illuminated emergency stop button that mounts on control panel doors and equipment to immediately shut down machinery in case of danger, with a twist-to-release mechanism to prevent accidental re-start.
A replacement push button actuator for EAO Series 02 modular switches, used to activate electrical circuits in industrial control panels and machinery.
A yellow-handled selector switch with two positions for industrial control panels, sealed against dust and water for outdoor or wet environments.
A red emergency stop button with twist-release action that mounts on control panels and machinery to safely cut power in dangerous situations.
A bright red emergency stop button with twist-release mechanism that mounts on machine control panels and is fully waterproof for dusty or wet environments.
A illuminated emergency stop button with twist-release actuation that mounts on control panels to safely shut down machinery in industrial operations.
A red illuminated emergency stop button that mounts on control panels to safely shut down machinery; features a twist-to-release mechanism and water-resistant design.
A small black push-button switch for electronic control panels and devices, rated for 12V power and up to 50mA current.
A rugged red or yellow emergency stop button that mounts on the surface of control panels and machinery to safely shut down equipment in wet or dusty conditions.
An ivory-colored replacement cap for APEM tactile keyboard switches, used to complete or repair keypad and control panel assemblies.
A red emergency stop button that mounts on control panels to safely shut down machinery, rated for use in wet and dusty industrial environments.
A rugged Siemens joystick control switch rated IP65/IP67 for outdoor and wet environments, used to manually operate cranes, hoists, and industrial machinery.