Brass pipe fitting for general plumbing and pipeline applications.
Brass pipe fitting for general plumbing and pipeline applications.
PVC socket for joining two pipes of equal size in straight configuration.
Grey PVC 45-degree tee connector for outdoor sewer and drainage systems.
PVC coupler for connecting two 20mm pipes in a straight line.
PVC tank adapter for 40mm pipe connection to water storage tanks.
PVC cap for 1-inch pipes, seals and closes pipe ends.
Right-angle PVC elbow for sharp turns in pipe installations and plumbing.
Plastic pipe socket fitting for joining 40mm CPVC water and irrigation pipes.
Straight PVC adapter connecting 32mm cemented pipe to one-inch thread.
Quick push-fit coupler for joining two water pipes in a straight line.
Push fit copper end stop for fifteen millimeter pipes in plumbing systems.
Brass push-fit compression fitting with 1/8 inch BSPP male threads.
PVC reducer tee for underground drainage and sewer pipe connections and direction changes.
PVC threaded straight adapter for joining pipes in water distribution systems.
PVC end cap for sealing and closing plastic water pipes safely.
Brass spigot fitting with 1/8 inch BSPP male thread for push-fit connection.
PVC socket cap closes and seals 1/2-inch pipe ends.
PVC elbow pipe fitting for redirecting water flow in plumbing systems.
PVC reducer bush for significant step-down in large water pipe systems.
PVC reducer bush for connecting larger and smaller diameter pipes together.
PVC reducer bush connecting 50mm pipe to 40mm pipe for plumbing systems.
Forty-five-degree plastic elbow for two-inch PVC and ABS pipes.
PVC cap to seal off the end of 20mm pipes.
PVC equal tee fitting for joining three pipe sections at right angles.
Red PVC cable sleeve for color-coded wire protection in electrical installations.
Legris brass straight push-fit connector for 6mm pipe, BSP 1/8 inch male thread.
PVC reducer bush fitting that connects 40mm to 25mm pipes in water and irrigation systems.
45-degree angled PVC elbow for gradual bends in larger water pipes.
45-degree angled PVC elbow for gentle direction changes in water systems.
PVC tank adapter for 20mm pipes connecting tanks to water distribution systems.
PVC reducer bush stepping down from 32mm to 20mm pipes.
PVC reducer bush stepping down from 40mm to 20mm pipes.
Grey PVC tee junction for sewer pipes, 250x200mm, push-fit connection.
Threaded socket fitting joins two 1/2 inch male threads together.
PVC tee fitting that connects three pipes at 90-degree angles for water and fluid systems.
PVC straight tank adapter fitting for connecting 1.5 inch water or irrigation pipelines.
Legris brass push-fit reducer connecting 3/8 inch to 1/4 inch BSPP threads.
Push-fit tee connector for splitting water pipes in three directions equally.
Push-fit CPVC equal tee connector for 15mm pipes in plumbing systems.