A roller limit switch that detects when machinery reaches a set position and triggers an electrical signal to stop or control the machine, sealed against dust and water for outdoor and wet environments.

An Omron industrial limit switch operating head with a roller lever that detects machine position and movement in dusty or wet environments, rated for 3 amperes AC power.

A rugged electrical switch with a roller arm that detects machine position and triggers control circuits; used to stop or start equipment at specific points in manufacturing and machinery automation.

A durable three-position selector switch with a black handle that mounts in a 22mm hole and stays in the position you set it—used to control equipment on industrial machines and control panels.

A compact black selector switch with a short lever handle that mounts in a 22.5mm hole and controls two different circuit paths in industrial machines and control panels.

A heavy-duty 3-position key-operated selector switch with spring-return action for controlling industrial machines and electrical systems, suitable for outdoor and wet environments.

A waterproof pushbutton switch with a lighted cap that stays momentary and handles 50 mA at 24 volts, used in control panels and machine interfaces where dust and moisture are present.

A green-handled three-position selector switch that mounts in a 22mm panel cutout to let operators choose between three operating modes on industrial machines and control systems.

A heavy-duty waterproof limit switch with a rod actuator that detects when machinery or equipment reaches a specific position, commonly used to stop or control movement on industrial machines.

A red emergency stop button that mounts into a 22mm hole on control panels and immediately cuts power to machines when pressed and pulled, designed for harsh wet and dusty industrial environments.

A tough 12-button keypad with IP67 waterproof protection and anti-vandal design, used for secure access control and industrial machine operation in harsh outdoor and indoor environments.

A rugged metal limit switch with a rod plunger that detects when machinery or equipment reaches a specific position, commonly used on factory machines and equipment to trigger safety stops or alarms.

A heavy-duty metal limit switch with a plunger that detects when machinery reaches a set position, commonly used to stop or control equipment movement on production lines and industrial machines.

A 3-position latching key switch with 22mm diameter that fits into control panel cutouts for machines and equipment; used to turn operations on, off, or into a special mode with a physical key for safety.

A grey plastic enclosure with 6 holes for mounting push buttons and control switches, commonly used to house emergency stop buttons and operator controls on industrial machines and equipment.

A grey plastic enclosure with two holes for mounting 22mm push buttons, rated to keep out dust and water, used to house electrical control buttons on machines and outdoor installations.

Grey electrical connector block that snaps onto DIN rail and accepts wires up to 4 mm² using a simple push-in method—ideal for control panels and machine wiring.

A two-position illuminated selector switch with an orange handle that fits into a 22mm panel cutout, used to control equipment on/off or select between two operating modes in industrial machines and control panels.

A heavy-duty roller limit switch that detects machine position and triggers electrical circuits when equipment reaches end-of-travel, commonly used on industrial doors, gates, and automated machinery.

An industrial foot switch with aluminum casing used by operators to control machines hands-free, rated for 230V AC and 4A current with both normally-open and normally-closed contact options.

A two-position selector switch head with IP66 waterproof rating that mounts in a 23mm panel cutout, commonly used on industrial machines and control panels to switch between two operating modes.

A rugged metal limit switch with a spring lever that detects machine position or movement; commonly used in industrial automation and machinery to stop or change direction when a moving part reaches a set point.

An illuminated 3-position selector switch with a 22.5mm mounting hole, rated for wet and dusty environments, commonly used to control pump modes or equipment selection on industrial machines and panels.

A waterproof limit switch with a roller lever that detects when machinery reaches a specific position and triggers an electrical circuit change, commonly used to stop conveyor belts or machine movements at set points.

A heavy-duty position sensor with a push-button plunger that detects machinery movement and triggers electrical actions; used on factory equipment and production lines to stop or control machines at set points.